Makita LS1016L dimensions Wiring in Motor housing and Handle for UK

Page 36

P 36/ 37

Wiring diagram

Fig. D-2B

Wiring in Motor housing and Handle for UK 110V

Field lead wires have to be tightened in the Motor housing so as not to touch Armature.

Terminal
block	Do not put Lead wires on ribs.

Controller

Field lead wires

*(orange)

*(black)

*(yellow)

rib

case of Power	ribs for Laser
supply circuit	switch unit

Pass Lead wires from Motor housing through the notch of Handle.

Pass the Lead wires through the Rib for Laser switch unit. Do not put the Lead wires on the Ribs.

Wiring on Line filter

Lead wire (black) for connecting

Main switch and Terminal block

Wind Lead wires to Line filter one time as illustrated right.

	Lead wre (red) for connecting	Line filter
	Controller and Terminal block	Line filter
	Controller and Terminal block

Image 36

Contents Specification Optional accessoriesStandard equipment Cutting Capacities Necessary Repairing Tools RepairRepair Lubrications Spiral bevel gear 32 80 Helical gear Repair DISASSEMBLY/ASSEMBLY 3-1. Blade case, Motor section DisassemblingBlade case, Motor section Correct WrongAssembling DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY Safety lock mechanism 3mm Safety cover B Repair DISASSEMBLY/ASSEMBLY 3-4. Safety cover a Turn Base, Base Positive lock mechanism of Turn base Assembling of Square rod complete Stopper pinFront arm section Arm complete, Arm holderStopper Laser Mechanism for LS1016L only Adjustment Lower-slide lock mechanismGuide fence BladeLaser for LS1016L only Adjustment Circuit diagram Motor housingHandle cover Handle sectionHandle cover Handle section UK 110V onlyArgentine Fig. D-1D 110-127V area except UK Wiring diagram Inside of Case Outside of CaseFig. D-2A Fig. D-2D Fig. D-2E Wiring in Motor housing and Handle for UK Laser circuit section viewed from front side