Networking Your Printer

Connecting to an Ethernet network

Before you connect, you need:

an Ethernet network that includes a router, switch, or hub with an Ethernet port.

a Category 5 (or higher) Ethernet cable.

to temporarily disable your firewall until the printer is successfully installed and communicating.

To connect to an Ethernet network:

1. Connect the Ethernet cable to the Ethernet port on the back of the printer.

2.Connect the other end of the Ethernet cable to an available Ethernet port on your router, switch, or hub.

3.If you haven’t installed the KODAK All-in-One Printer Software:

a.Go to www.kodak.com/go/aiodownloads.

b.In the results list, click the link for KODAK All-in-One Software for your computer’s operating system.

c.Follow the on-screen instructions.

16

www.kodak.com/go/aiosupport

Page 22
Image 22
Kodak 7.1 manual Connecting to an Ethernet network