Kodak 7.1 manual Monitoring and adjusting printer performance, Checking ink levels

Maintaining Your Printer

Updating if your printer is connected to a computer with MAC OS

To update the software:

1.Make sure your computer is connected to the Internet.

2.Open Home Center Software.

3.Select the Tools tab.

4.Click Check for Software Updates.

5.If there are updates, follow the on-screen instructions.

To update the firmware:

1.Make sure your computer is connected to the Internet.

2.Connect the printer to the computer with a USB cable, Ethernet cable, or wirelessly (if not currently connected).

3.Open Home Center Software.

4.Select the Tools tab.

5.Click Check for Printer (Firmware) Updates.

6.If there are updates, follow the on-screen instructions.

IMPORTANT: Do not turn off or disconnect your printer or your computer during the update. Doing so may cause the printer to become inoperable. Your printer will restart during the upgrade.

Monitoring and adjusting printer performance

From the control panel, you can perform tasks to help keep the printer functioning well.

Checking ink levels

To check the ink levels:

1.Press .

2.Touch , then touch Maintenance.

3.Touch Check Ink Levels.

The LCD shows approximate levels of ink in the cartridges so you know when it’s time to order replacement cartridges. Use 10 Series ink cartridges.

NOTE: You can order ink cartridges online. Go to www.kodak.com/go/printingsupplies.

102 www.kodak.com/go/aiosupport