Makita LS1016L dimensions Front arm section, Arm complete, Arm holder

Page 20

P 20/ 37

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-9. Front arm section

DISASSEMBLING

Refer to Fig. 49.

1)Loosen M6x8 Hex. socket set screw (2pcs.) on Pipe holder and remove Pipe holder.

2)Loosen M6x18 Thumb screw and pull out Front

arm complete straightly in the direction designated with white arrow to prevent the pipes from being stuck.

ASSEMBLING

Take the disassembling step in reverse.

[3]-10. Arm complete, Arm holder

Fig. 49

Front arm

Pipes of Front arm complete

complete

M6x8 Hex. socket

 

set screw (2pcs.)

 

Pipe holder

 

M6x18 Thumb screw

DISASSEMBLING

1)Loosen Lever 105 by turning counterclockwise. (Fig. 50)

2)Remove M4x10 Pan head screw and then remove Lever 105. (Fig. 51)

3)Remove M10 Hex bolt and Flat washer 10. (Fig. 51)

4)Remove M10-17 Hex lock nut using Box wrench 17.

Flat washer 10 (2pcs.) and Thrust needle cage 1024 can be removed as illustrated in Fig. 52.

5)Remove Arm section from Arm holder complete. (Fig. 53)

6)Remove Retaining ring S-12 from the groove on Arm using 1R291. Stopper, Flat washer 12 and Torsion spring 14 can be removed. (Fig. 54) Remove CT 4x16 Tapping screw (3pcs.) Pointer and Arm cover. (Fig. 54)

Fig. 50

Lever 105

Fig. 51

M4x10 Pan

head screw

Lever 105

Flat washer 10

M10 Hex bolt

Fig. 52

Flat washer 10

M10-17

 

Hex lock nut

Thrust needle cage 1024

Fig. 53

Arm section

Arm holder complete

Fig. 54

Arm cover

CT 4x16

Tapping screw

 

 

(3pcs.)

 

Stopper

 

Torsion

Pointer

spring 14

 

Flat washer 12

Groove on Arm for

 

fitting Retainer ring S-12

Retainer ring S-12

Image 20
Contents Standard equipment SpecificationOptional accessories Cutting Capacities Necessary Repairing Tools RepairRepair Lubrications Spiral bevel gear 32 80 Helical gear Repair DISASSEMBLY/ASSEMBLY 3-1. Blade case, Motor section DisassemblingBlade case, Motor section Correct WrongAssembling DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY Safety lock mechanism 3mm Safety cover B Repair DISASSEMBLY/ASSEMBLY 3-4. Safety cover a Turn Base, Base Positive lock mechanism of Turn base Assembling of Square rod complete Stopper pinFront arm section Arm complete, Arm holderStopper Laser Mechanism for LS1016L only Adjustment Lower-slide lock mechanismGuide fence BladeLaser for LS1016L only Adjustment Circuit diagram Motor housingHandle cover Handle sectionHandle cover Handle section UK 110V onlyArgentine Fig. D-1D 110-127V area except UK Wiring diagram Inside of Case Outside of CaseFig. D-2A Fig. D-2D Fig. D-2E Wiring in Motor housing and Handle for UK Laser circuit section viewed from front side