Makita LS1016L dimensions Fig. D-2D

Page 34

P 34/ 37

Wiring diagram

Fig. D-2D

Wiring in Motor Housing and Handle for 220 - 240V area where Radio Interference suppression is not required.

Field lead wires have to be tightened in the Motor housing so as not to touch Armature.

Insulated terminal

Do not put Lead wires on these ribs.

Controller

Field Lead wire (white) Field Lead wire (purple)

Do not route Field lead wires (white and purple) between Armature and Baffle plate.

Field Lead wires * (orange)

*(black)

*(yellow)

rib

Case of Power

ribs for Laser

supply circuit

switch unit

Pass Lead wires from Motor housing through the notch of Handle.

Pass Lead wires through ribs as illustrated.

Do not put their Lead wires on the ribs. Switch for protection of brake coil

Connection of Receptacles

Receptacles have to be connected so that their wire connecting portions face the bottom of Handle.

Receptacles

Bottom of Handle

Wire connecting portion

Image 34
Contents Optional accessories SpecificationStandard equipment Cutting Capacities Necessary Repairing Tools RepairRepair Lubrications Spiral bevel gear 32 80 Helical gear Repair DISASSEMBLY/ASSEMBLY 3-1. Blade case, Motor section DisassemblingBlade case, Motor section Correct WrongAssembling DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY DISASSEMBLY/ASSEMBLY Safety lock mechanism 3mm Safety cover B Repair DISASSEMBLY/ASSEMBLY 3-4. Safety cover a Turn Base, Base Positive lock mechanism of Turn base Assembling of Square rod complete Stopper pinFront arm section Arm complete, Arm holderStopper Laser Mechanism for LS1016L only Adjustment Lower-slide lock mechanismGuide fence BladeLaser for LS1016L only Adjustment Handle cover Circuit diagramMotor housing Handle sectionHandle cover Handle section UK 110V onlyArgentine Fig. D-1D 110-127V area except UK Wiring diagram Inside of Case Outside of CaseFig. D-2A Fig. D-2D Fig. D-2E Wiring in Motor housing and Handle for UK Laser circuit section viewed from front side