Makita LS1016L dimensions Positive lock mechanism of Turn base

P 18/ 37

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-6. Positive lock mechanism of Turn base

DISASSEMBLING

Fig. 40

(1)Remove Stop ring E-7. (Fig. 40)

Grip 50, Compression spring 11, Flat washer 10 and Cam can be removed.

(2)Remove M6x14 H.S.Binding head screw then remove Miter lock plate in the direction designated with black arrow. (Fig. 41)

(3)Remove CT 4x16 Tapping screw (2pcs.) and Lock lever plate. (Fig. 42)

(4)Push Lock pin 6 in the direction designated with black arrow and pick up Lock lever in the direction designated with gray arrow. (Fig. 43)

(5)Remove Pin 3 from Lock pin 6, then pull out Lock pin 6 in the direction designated with black arrow. (Fig. 44)

Stop ring E-7

Cam

Compression spring 11

Flat washer 10

Grip 50

Turn base

Groove for Stop ring E-7

Fig. 41 Fig. 42

M6x14 H.S.Binding head screw

Turn base

Miter lock plate

Compression spring 13

Pin

Miter lock plate

Miter lock plate can be pulled out without removing Pin.

Lock lever plate	CT4x16
	Tapping screw
	(2pcs.)

Fig. 43

Lock lever	Lock pin 6
ASSEMBLING

Fig. 44

Compression Pin 3	Lock pin 6
spring 6

Assemble Turn base section as illustrated in Fig. 45. And then, take the disassembling step in reverse. Refer to Fig. 37.

Fig. 45

Apply Grease to Slide plate and the center hole of Base before assembling Turn base section.

Turn base section has to be tightened with M8x45 Hex bolt so that it can smoothly turn without wobbling.

M8x45 Hex bolt

Flat washer 8

Slide plate

Base

Lock lever

While pressing down Lock lever, fit Turn base section to Base.