90501515 JS650L 4/5/06 10:53 AM Page 9
SAWING LAMINATES
As the saw blade cuts on the upward stroke, splintering may occur on the surface closest to the shoe plate.
-Use a
-Saw from the back surface of the workpiece.
-To minimize splintering, clamp a piece of scrap wood or hardboard to both sides of the workpiece and saw through this sandwich.
SAWING METAL
-Be aware that sawing metal takes much more time than sawing wood.
-Use a saw blade suitable for sawing metal.
-When cutting thin metal, clamp a piece of scrap wood to the back surface of the workpiece and cut through this sandwich.
-Spread a film of oil along the intended line of cut.
TROUBLESHOOTING
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Cord not plugged in. | • Plug tool into a working |
|
| outlet. |
| • Circuit fuse is blown. | • Replace circuit fuse. |
|
| (If the product repeatedly |
|
| causes the circuit |
|
| fuse to blow, discontinue |
|
| use immediately and |
|
| have it serviced at a Black |
|
| & Decker service center or |
|
| authorized servicer.) |
| • Circuit breaker is tripped. | • Reset circuit breaker. |
|
| (If the product repeatedly |
|
| causes the circuit breaker |
|
| to trip, discontinue use |
|
| immediately and have it |
|
| serviced at a Black & |
|
| Decker service center or |
|
| authorized servicer.) |
| • Cord or switch is damaged. | • Have cord or switch |
|
| replaced at Black & |
|
| Decker Service Center or |
|
| Authorized Servicer |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
9