Grizzly G0759 owner manual 50 2250 RPM

Main Specifications:
Operation Info
Spindle Travel	2 in.
Max Distance Spindle to Column	7-1/2 in.
Max Distance Spindle to Table	13 in.
Longitudinal Table Travel (X-Axis)	18-7/8 in.
Cross Table Travel (Y-Axis)	6-7/8 in.
Vertical Head Travel (Z-Axis)	11 in.
Head Tilt (Left/Right)	90 deg.
Drilling Capacity for Cast Iron	3/4 in.
Drilling Capacity for Steel	5/8 in.
End Milling Capacity	3/4 in.
Face Milling Capacity	2-1/2 in.
Table Info
Table Length	26-5/8 in.
Table Width	7-1/16 in.
Table Thickness	1-3/4 in.
Number of T-Slots	3
T-Slot Size	1/2 in.
T-Slots Centers	2-1/2 in.
Spindle Info
Spindle Taper	R-8
Number of Vertical Spindle Speeds	Variable
Range of Vertical Spindle Speeds	50 – 2250 RPM
Quill Diameter	2.36 in.
Drawbar Thread Size	7/16-20
Drawbar Length	9-11/16 in.
Spindle Bearings	Tapered Roller Bearings
Construction
Spindle Housing/Quill	Cast Iron
Table	Precision-Ground Cast Iron
Head	Cast Iron
Column/Base	Cast Iron
Base	Cast Iron
Stand	Steel
Paint	Enamel
Other Specifications:
Country Of Origin	China
Warranty	1 Year
Approximate Assembly & Setup Time	1 Hour
Serial Number Location	ID Label on Head Casting
Sound Rating	80 dB
ISO 9001 Factory	Yes
CSA Certified	No
Features:
Digital spindle scale reads metric, inches, zero, set, on/off
Forward/reverse switch
Chip guard
Digital display for spindle speed
Dovetail column
Front mounted fine feed knob
Coolant trough

-6- Model G0704 (Mfg. Since 08/11)