Environment Protection First, Solutions | Tefal FV8110C0, FV8110D0

ENG

ENVIRONMENT PROTECTION FIRST !

Your appliance contains valuable materials which can be recovered or recycled. ⇐ Take it to a local civic waste collection point.

5-IF THERE IS A PROBLEM

Problem

Possible causes

Solutions

•Water drips from the holes in the soleplate.

•The chosen temperature is too low and does not allow for the formation of steam.

•You are using steam while the iron is not hot enough.

•You are using the Shot of Steam button too often.

•The steam flow is too high.

•You have stored the iron horizontally, without emptying it and without setting it to DRY.

•Set the thermostat in the coloured zone (from ●● to MAX).

•Wait until the thermostat light goes out.

•Wait a few seconds between each use of the button.

•Reduce the steam flow.

•See the section "Storing your iron".

• Brown streaks come through the	•	You are using chemical descaling	•	Do not add any descaling agents to
holes in the soleplate and stain		agents.		the water in the water tank.
the linen.				(see section “what water to use).
	•	You are using pure distilled/deminera-	•	Carry out a self-clean and use untreated
		lised or softened water.		tap-water.
	•	Fabric fibres have accumulated in the	•	Carry out a self-clean.
		holes of the soleplate and are burning.	•	Clean the soleplate with a non-metallic
				sponge.
	•	Your linen has not been rinsed sufficiently	•	Vacuum the holes of the soleplate
		or you have ironed a new garment before		from time to time.
		washing it.

• The soleplate is dirty or brown	•	You are using too high a temperature.	•	Clean the soleplate as indicated above.
and can stain the linen.				See the temperature table to correctly
				set the thermostat.
	•	Your linen has not been rinsed	• Clean the soleplate as indicated above.
		sufficiently or you have ironed a new		Always spray starch onto the reverse
		garment before washing it.		side of the fabric to be ironed.

• There is little or no steam.	•	The water tank is empty.	•	Fill it.
	•	The anti-calc valve is dirty.	•	Clean the anti-calc valve.
	•	Your iron has a build-up of scale.	•	Clean the anti-calc valve and carry out
				a self-clean.
	•	You iron has been used dry for too long.	•	Carry out a self-clean.

• The soleplate is scratched or	•	You have placed your iron flat on a	•	Always set your iron on its heel.
damaged.		metallic rest-plate.

• Water is running out of the tank	•	You have not closed the tank stopper	•	Make sure that the stopper is properly
filler hole.		properly.		closed and that the arrow points to
				the “closed padlock” symbol.

• Steam comes from the iron as	•	The steam control is not set to the	•	Check that the steam control is set to
you finish filling the tank.		DRY position.		the DRY position.

• The spray does not spray	•	The tank is empty.	•	Fill the tank.

If you have any problem or queries,

please contact our Customer Relations team first for expert help and advice.

FV8110E0, FV8110L0, FV8110D0, FV8110E1, FV8110G0 specifications

The Tefal FV8110 series of steam irons, including the FV8110D0, FV8110L0, FV8110E0, FV8110C0, and FV8110E1, represent a powerful solution for tackling wrinkles and creases in a variety of fabrics. Esteemed for their efficient performance and user-friendly features, these models ensure a smooth and effective ironing experience for both casual users and experienced homemakers.

One of the standout features of the FV8110 series is the 2400-watt power output, which allows the irons to heat up quickly and deliver high steam performance. This ensures that users can tackle laundry piles without waiting too long, making it an ideal choice for busy lifestyles. The steam output of up to 40 grams per minute provides consistent and strong steam flow, enabling effortless removal of wrinkles from different types of clothing, including thicker materials like denim and curtains.

The FV8110 models are equipped with Tefal’s unique Durilium technology, which features a highly efficient non-stick soleplate. This soleplate not only glides easily over fabrics but also ensures even heat distribution, significantly reducing the chances of scorching delicate materials. Additionally, the soleplate's durability means that it can withstand heavy use without losing its non-stick properties.

Another key feature is the vertical steam capability, which allows for vertical steaming of garments like suits or dresses on hangers. This is especially convenient for quick touch-ups and when dealing with delicate fabrics that shouldn't be laid flat.

For safety and convenience, the FV8110 series includes an automatic shut-off feature, which activates after a period of inactivity. This ensures peace of mind for users who may forget to turn off their irons after use. The anti-drip system prevents water leakage, protecting clothes and keeping surfaces clean.

With a large water tank capacity, the FV8110 models reduce the frequency of refills, enhancing efficiency during ironing sessions. The easy refill design allows users to fill the tank without hassle, optimizing user experience.

In summary, the Tefal FV8110 series, with its combination of powerful steam production, innovative soleplate technology, safety features, and ease of use, is designed to meet the diverse needs of modern ironing. These characteristics make each model in the series a valuable addition to any home, ensuring that every garment looks its best with minimal effort.