Print: How do I?
Use this section to answer printing questions.
System Settings
The HP ToolboxFX System Settings folder contains links to the following main pages:
●Device information. View information about the MFP, such as the description and a contact person.
●Paper handling. Change the MFP
●Print quality. Change the MFP
●Print density. Change the print density settings, such as contrast, highlights, midtones, and shadows.
●Paper types. Change the MFP mode settings for each media type, such as letterhead, prepunched, or glossy paper.
●System Setup. Change the MFP system settings, such as MFP language and jam recovery.
●Service. Gain access to various procedures required to maintain the MFP.
●Device Polling. The HP ToolboxFX periodically communicates with your device to determine device status and enabled features.
●Save and restore settings. Save the current MFP settings to a file on the computer. Use this file to load the same settings onto another printer or MFP to restore these settings to this MFP at a later time.
●Password. If set, the password must be entered to change any of the HP ToolboxFX system settings, email alerts, or network settings.
Device information
Save the HP ToolboxFX Device information for future reference about the MFP. The information that is typed in these fields appears on the Configuration page. It is possible to type any character in each of these fields.
NOTE Click Apply to make the changes take effect.
120 Chapter 12 How do I? | ENWW |