HP CM1015 manual Selecting print media settings, Printer-driver features

Page 139

Selecting print media settings

When a job is sent to the printer, the printer driver controls what paper tray is used to pull media through the printer. By default, the printer automatically selects the tray, but a specific tray can be chosen based on three user specified settings: Source, Type, and Size. These settings are available from the Application Setting dialog box, the Print dialog box, or the printer driver.

Setting	Description

Source	Directs the printer to pull paper from a user-specified tray. The
	printer tries to print from this tray, no matter what type or size
	media is loaded in it. However, if the selected tray is configured
	from the HP ToolboxFX for a type or size and that does not
	match the print job, the printer does not print automatically. To
	begin printing, load the selected tray with the correct type or
	size of print media for the print job. When loading the tray, the
	printer begins printing. If the printer does not begin printing:
	●	Verify the tray configuration matches the size or type of
		the print job.
	●	Press OK to have the printer try to print from another tray.

Type or Size	Directs the printer to pull paper or print media from the first tray
	that is loaded with the type or size that you selected. Always

print by Type for special print media such as labels or transparencies.

NOTE When the trays have not been configured for a certain type or size from the HP ToolboxFX, load the paper or print media into a tray then select the Type or Size from the Page Setup dialog box, the Print dialog box, or the printer driver.

NOTE An Administrator or individual user can set the HP ToolboxFX to direct the MFP to pull from a tray that is pre-configured for a specified Type or Size. This is helpful when frequently printing on the same type of media; a dedicated tray is already pre- configured for printing.

Printer-driver features

Some printer drivers and some operating systems do not support all of these MFP features.

Task	Driver Tab	Option

Set custom paper	Paper	Size is

Print in grayscale	Color	Print in Grayscale

Create and use watermarks	Effects	Watermark

NOTE For Windows 2000 and XP environments, Administrator privileges are required to create watermarks but are not required to add existing watermarks to documents.

ENWW	Print: How do I? 125

Image 139

Contents HP Color LaserJet CM1015/CM1017 MFP Page HP Color LaserJet CM1015/CM1017 MFP Trademark Credits Copyright and LicenseTable of contents Print Software for MacintoshColor Scan CopyHow do I? Photo114 Managing and maintaining the multifunction peripheral MFP Problem solving Work with memory Appendix a Accessories and supplies informationAppendix B Service and support Appendix C Specifications241 Xii Multifunction peripheral MFP basics HP Color LaserJet CM1015 MFP HP Color LaserJet CM1017 MFP HP Color LaserJet CM1015/CM1017 MFP Series configurationsHP Color LaserJet CM1015/CM1017 MFP Series HP Color LaserJet CM1015/CM1017 MFP Series featuresCopy AccessibilitySupplies Expandability1Front view HP Color LaserJet CM1017 MFP shown Walkaround2Back and side view Enww Software and supported operating systems SoftwareSoftware Installation option Description Install softwareDownload drivers Software tipsDownload the latest printing software What other software is available?Print media Media supported on this MFP Media Type Dimensions1 Weight Capacity2 1Tray specificationsMedia that can damage the printer Select print mediaMedia to avoid Envelopes Special media for printingLabels Heavy paper TransparenciesGlossy paper and photo paper Letterhead or preprinted formsControl panel HP Color LaserJet CM1015 MFP control panel features HP Color LaserJet CM1015 MFP control panel features Use the two-line display HP Color LaserJet CM1015 MFP HP Color LaserJet CM1017 MFP control panel features Enww Use the graphical display HP Color LaserJet CM1017 MFP Menu item Sub-menu item Description Control-panel menusUse the control-panel menus Control-panel menu mapMenu Item Description Cancel job ServicePaper setup Default paper size Default paper typeCartridge low Select Cancel job toCancel job is chosen Cleaning modeLink speed TCP/IP configurationUSB speed Less paper curl Archive printSoftware for Windows User assistance Printer driver recommendationsInstall the PostScript driver using Add Printer Software Description This MFP supports these software componentsOther software Enww Uninstall Windows software via the Program group Uninstall the printing softwareUninstall Windows software using Add or Remove Programs Delete printer drivers from the printers folder Uninstall a Recommended or Custom installationWindows 2000 or Windows XP Software for Macintosh Install printer drivers for Mac OS X V10.3 and later Install Macintosh printing system software for networksMacintosh utility and application support To install the printing system software Open the printer drivers Click the Installable Options menuMacintosh printer drivers Supported printer driversPrint multiple pages on one sheet of paper Use features in the Macintosh printer driverCreate and use presets in Mac OS Print a coverTo print on both sides manually Print on both sides of the paperSet the color options To print multiple pages on one sheet of paperTo set the color options Enable memoryPrint Color as Gray Manage MFP color options on Macintosh computersAdvanced color options for text, graphics, and photographs HP Device Configuration Mac OS X V10.3 and Mac OS X Solve Problems with Mac OS Solve common Macintosh problemsResolve hardware problem Print job was not sent to the correct MFP Cause SolutionUnable to print from a third-party USB card Cause Solution Resolve software problemsEnsure there are not too many USB devices drawing power from Print Load tray 1 single-sheet feed tray Load traysLoad tray Enww Enww Enww Enww 1Special media printing guidelines Print on special mediaSetting Description Selecting print media settingsControl print jobs Restore the default printer-driver settings Printer-driver featuresTask Driver Tab Option Print from Windows Printer-driver settingsSuch as Allow manual duplexing Print on both sides of the paper Print on both sides of the paper Considerations when canceling printing Cancel a print jobColor HP ImageREt Media selection OverviewColor options Change color options Automatic versus Manual color adjustmentManage color options Print in GrayscaleStandard red-green-blue sRGB Edge ControlRGB Color Neutral Grays Match colors Copy Change the number of copies for the current job Cancel a copy jobBasic copy functions Start a copy jobPaper type Supported paper type Adjust copy qualityCopy paper Set the MFP to make only black and white copiesTo adjust color balance settings Adjust the color balance in copiesAdjust the copy quality for the current job Adjust the default copy qualitySet color balance on a per-job basis Adjust the lighter/darker contrast settingColor balance option Description Reduce or enlarge copies To change the default copy sizeChange copy size for the current job Copy edge-to-edge originals Copy Scan Scan methods Supported file types Add folder destinations Set up pre-configured destinations on the MFPScan from the device control panel Program the device Scan To button from the control panelDelete destinations To view HP Solution Center Scan by using HP Solution Center WindowsScan to file Scan from the device and HP Director MacintoshScanning tasks Use page-by-page scanningScan from a TWAIN-enabled program Scan using TWAIN-compliant and WIA-compliant softwareUse TWAIN-compliant and WIA-compliant software Scan edge-to-edge originals Cancel a scan jobScanner resolution and color Scan a photoSetting Recommended use Resolution and color guidelinesPhoto Insert a memory card Now print photos using the HP Color LaserJet CM1017 MFP To view or rotate photos from the memory card View or rotate photos from the memory cardTo create a slideshow Create a photo slideshow on the graphical display screenEnable or disable a memory card Print photos directly from the memory card Press Proofsheet Print and scan photos from a proof sheetSave photos to the workstation from a memory card Print photos using the Photo Features button Index print Best Photo Fast Print a memory card indexPhoto Set up the MFP and use it on the network Set up the MFP and use it on the network Manage the network View network settingsRestore the network defaults Change network settingsManually configure a static IP address Network configurationConfiguration IP configurationAutomatic configuration Link speed settingsSupported network protocols Service name DescriptionIP address Internet Protocol IPTransmission Control Protocol TCP User Datagram Protocol UDPSubnet mask Configure IP parametersDynamic Host Configuration Protocol Dhcp SubnetsVerify that the MFP is on and online Problem SolvingDefault gateway GatewaysAutoip Resolve communication problems with the networkEnww Enww How do I? HP Color LaserJet CM1017 MFP control panel features Control panel and other settings How do I?Use the graphical display HP Color LaserJet CM1017 MFP Enww Control-panel menus 2Reports Menu 4System Setup Menu 5Service Menu 5Service Menu Print How do I? System SettingsDevice information Print density Print density settings DescriptionPaper handling Print qualityTo remove the system password Set the system passwordTo reset all MFP settings to factory defaults Print Settings Memory card HP Color LaserJet CM1017 MFP only Control print jobsPCL5c PostScriptPrinter-driver features Selecting print media settingsPrint from Windows Printer-driver settingsEnvelopes Special media for printingLetterhead or preprinted forms LabelsTransparencies Glossy paper and photo paperHeavy paper Scan from the device control panel Copy and Scan How do I?Program the device Scan To button from the control panel Copy and Scan How do I? Print and scan photos from a proof sheet Enable or disable a memory cardPhoto How do I? HP Color LaserJet CM1017 MFP only Print photos directly from the memory cardSave photos to the workstation from a memory card Network How do I? HP Color LaserJet CM1017 MFP only Restore the network defaultsFind the network IP address Set the system password Maintenance How do I?Change MFP toner warnings Clean the scanner glassCalibrate the MFP Calibrate the MFP from the front control panel Clean the MFPCalibrate the MFP from the HP ToolboxFX Clean the paper path using HP ToolboxFX Managing and maintaining the multifunction peripheral MFP Demo ConfigurationTo print the Configuration page from the control panel Information pagesInformation pages To print the Supplies Status page from the control panel Supplies StatusNetworking page HP Color LaserJet CM1017 MFP only Usage Fonts pagesTo print a fonts page from the control panel Enww To print a menu map Menu mapView HP ToolboxFX HP ToolboxFXEvent log StatusHelp Set up status alertsSet up e-mail alerts AlertsSystem Settings Paper handling Set the system password Print Settings Network settings Use the embedded Web server Access the embedded Web server using a network connectionWindows Macintosh Information tab Settings tabOther links found in HP ToolboxFX Networking tabSupplies life Check supply status and order using the control panelCheck and order supplies using HP ToolboxFX Manage suppliesReplace and recycle supplies Check and order supplies using HP Solution CenterReset the MFP for non-HP supplies Supplies Storage GuidelinesHP anti-counterfeit supplies Web site Clean the scanner glass Clean the paper path using HP ToolboxFX Clean the MFPOn-going operation Cartridge-out overrideChange the print cartridge Change print cartridgesChange print cartridges Enww Enww Calibrate the MFP from the front control panel Calibrate the MFPCalibrate the MFP from the HP ToolboxFX Problem solving Problem solving checklist Problem solving processStep Verification step Possible problems Solutions Number Card? Computer?Control-panel messages Control panel message Description Recommended action Turn off then turn on Fan ErrorCleaning Device errorHP supplies InstalledInstall color cartridge Install black cartridgeMemory low Are disabled Memory is low. Press OKMemory card is unsupported Memory card slotsReady Non-HP color installedNon-HP supply UseReplace supply Scanner ErrorScanning error Unknown Memory Card ErrorGeneral print quality issues Solve print problemsPrint-quality problems Print-quality checklistProblem Cause Solution Problem Cause Configuration page. If so, contact See Load trays Solve issues with printing color documentsAaBbCc Solve print-media problems Media-handling problemsPrint-media guidelines Or from a faulty paper lot Performance problems See Media-handling problems Calibrate the MFP Resolve copy problemsMFP Use the table to solve image-scan issues Resolve scanning problemsResolve scan-quality problems using the table Enww Was the device exposed to an electric or magnetic field? Clear paper jams Where to look for jamsClear jams from inside the MFP Enww Clear jams from tray output area Clear jams from the back of the MFP Clear jams from tray 2 or optional tray Slide the tray into the MFP Open and close the front door HP ToolboxFX Additional problem solving toolsService menu Device pages and reportsCalibrate the MFP Clean the paper pathTo restore the factory-set defaults To clean the paper pathEnww Work with memory MFP memory Install memory DIMMs Enww Enww Go to Check Dimm installation Enable memory Check Dimm installationTo enable memory for Windows Enww Accessories and supplies information Memory SuppliesProduct name Description Part number Paper handling accessories Cable and interface accessoriesUser-replaceable parts Paper and other print mediaLanguage Part number Supplementary DocumentationEnww Service and support Hewlett-Packard limited warranty statement Print Cartridge Limited Warranty Statement HP Customer Care Online troubleshooting toolsHP Care Pack Services and Service Agreements Availability of support and serviceRepack the MFP Repacking the MFPWHO is Returning the EQUIPMENT? Service information formEnww Specifications Rated current Multifunction peripheral MFP specificationsPower requirements Volt modelsCategory Specifications Sound Power Level Declared Per ISORecommended1 Operating1 Storage1 When heated to 210C 410F for 0.1 second Regulatory information Introduction FCC regulations Ozone production Power consumptionEnvironmental Product Stewardship program Protecting the environmentReturns Extended warranty Material safety data sheetDeclaration of Conformity Declaration of conformityKorean EMI statement Vcci statement Japan Country/region-specific safety statementsLaser safety statement Canadian DOC statementJapanese Power Cord Statement Laserturvallisuus Luokan 1 Laserlaite Klass 1 Laser Apparat Finnish laser statementIndex Symbols/NumericsGateways DimmBootp MFP FCC WIA TCP Enww Page CB394-90907* *CB394-90907

Related manuals

Manual 2 pages 8.32 Kb