HP CM1015 manual Networking tab, Other links found in HP ToolboxFX

Page 171

Networking tab

This tab allows the network administrator to control MFP network-related settings when it is connected to an IP-based network.

●IP Configuration: Sets the IP configuration.

●Advanced: Enables network features such as SLP Config, DHCP, BOOTP, and AutoIP.

●mDNS: Sets the mDNS. These settings to turn on or off Rendezvous or Bonjour discovery.

●SNMP: Sets SNMP protocols.

Other links found in HP ToolboxFX

Internet access is required to use any of these links. When using a dial-up connection and a connection to the embedded web server was not first opened, connect to the embedded Web server before visiting these Web sites. Connecting might require closing and reopening the embedded Web server.

●HP Instant Support™: Connects to the HP Web site to help find solutions. This service analyzes the MFP error log and configuration information to provide diagnostic and support information specific to the MFP.

●Product Registration: Click to connect with the HP Web site to register the product.

●Order Supplies: Click to connect with the HP Web site and order genuine HP supplies, such as print cartridges and paper.

●Product Support: Connects to the support site for the HP Color LaserJet CM1015/CM1017 MFP to search for help regarding general topics.

ENWW	Use the embedded Web server 157

Image 171

Contents HP Color LaserJet CM1015/CM1017 MFP Page HP Color LaserJet CM1015/CM1017 MFP Trademark Credits Copyright and LicenseTable of contents Software for Macintosh PrintColor Scan CopyHow do I? Photo114 Managing and maintaining the multifunction peripheral MFP Problem solving Work with memory Appendix a Accessories and supplies informationAppendix B Service and support Appendix C Specifications241 Xii Multifunction peripheral MFP basics HP Color LaserJet CM1015 MFP HP Color LaserJet CM1017 MFP HP Color LaserJet CM1015/CM1017 MFP Series configurationsHP Color LaserJet CM1015/CM1017 MFP Series HP Color LaserJet CM1015/CM1017 MFP Series featuresCopy AccessibilitySupplies Expandability1Front view HP Color LaserJet CM1017 MFP shown Walkaround2Back and side view Enww Software and supported operating systems SoftwareSoftware Installation option Description Install softwareDownload drivers Software tipsDownload the latest printing software What other software is available?Print media Media supported on this MFP Media Type Dimensions1 Weight Capacity2 1Tray specificationsSelect print media Media that can damage the printerMedia to avoid Special media for printing EnvelopesLabels Heavy paper TransparenciesGlossy paper and photo paper Letterhead or preprinted formsControl panel HP Color LaserJet CM1015 MFP control panel features HP Color LaserJet CM1015 MFP control panel features Use the two-line display HP Color LaserJet CM1015 MFP HP Color LaserJet CM1017 MFP control panel features Enww Use the graphical display HP Color LaserJet CM1017 MFP Menu item Sub-menu item Description Control-panel menusUse the control-panel menus Control-panel menu mapMenu Item Description Cancel job ServicePaper setup Default paper size Default paper typeCartridge low Select Cancel job toCancel job is chosen Cleaning modeLink speed TCP/IP configurationUSB speed Less paper curl Archive printSoftware for Windows User assistance Printer driver recommendationsInstall the PostScript driver using Add Printer Software Description This MFP supports these software componentsOther software Enww Uninstall the printing software Uninstall Windows software via the Program groupUninstall Windows software using Add or Remove Programs Uninstall a Recommended or Custom installation Delete printer drivers from the printers folderWindows 2000 or Windows XP Software for Macintosh Install Macintosh printing system software for networks Install printer drivers for Mac OS X V10.3 and laterMacintosh utility and application support To install the printing system software Open the printer drivers Click the Installable Options menuMacintosh printer drivers Supported printer driversPrint multiple pages on one sheet of paper Use features in the Macintosh printer driverCreate and use presets in Mac OS Print a coverTo print on both sides manually Print on both sides of the paperSet the color options To print multiple pages on one sheet of paperTo set the color options Enable memoryManage MFP color options on Macintosh computers Print Color as GrayAdvanced color options for text, graphics, and photographs HP Device Configuration Mac OS X V10.3 and Mac OS X Solve Problems with Mac OS Solve common Macintosh problemsResolve hardware problem Print job was not sent to the correct MFP Cause SolutionUnable to print from a third-party USB card Cause Solution Resolve software problemsEnsure there are not too many USB devices drawing power from Print Load tray 1 single-sheet feed tray Load traysLoad tray Enww Enww Enww Enww 1Special media printing guidelines Print on special mediaSelecting print media settings Setting DescriptionControl print jobs Printer-driver features Restore the default printer-driver settingsTask Driver Tab Option Printer-driver settings Print from WindowsSuch as Allow manual duplexing Print on both sides of the paper Print on both sides of the paper Considerations when canceling printing Cancel a print jobColor Overview HP ImageREt Media selectionColor options Change color options Automatic versus Manual color adjustmentManage color options Print in GrayscaleEdge Control Standard red-green-blue sRGBRGB Color Neutral Grays Match colors Copy Change the number of copies for the current job Cancel a copy jobBasic copy functions Start a copy jobPaper type Supported paper type Adjust copy qualityCopy paper Set the MFP to make only black and white copiesTo adjust color balance settings Adjust the color balance in copiesAdjust the copy quality for the current job Adjust the default copy qualityAdjust the lighter/darker contrast setting Set color balance on a per-job basisColor balance option Description To change the default copy size Reduce or enlarge copiesChange copy size for the current job Copy edge-to-edge originals Copy Scan Scan methods Supported file types Add folder destinations Set up pre-configured destinations on the MFPScan from the device control panel Program the device Scan To button from the control panelDelete destinations To view HP Solution Center Scan by using HP Solution Center WindowsScan to file Scan from the device and HP Director MacintoshScanning tasks Use page-by-page scanningScan using TWAIN-compliant and WIA-compliant software Scan from a TWAIN-enabled programUse TWAIN-compliant and WIA-compliant software Scan edge-to-edge originals Cancel a scan jobScanner resolution and color Scan a photoSetting Recommended use Resolution and color guidelinesPhoto Insert a memory card Now print photos using the HP Color LaserJet CM1017 MFP To view or rotate photos from the memory card View or rotate photos from the memory cardTo create a slideshow Create a photo slideshow on the graphical display screenEnable or disable a memory card Print photos directly from the memory card Press Proofsheet Print and scan photos from a proof sheetSave photos to the workstation from a memory card Print photos using the Photo Features button Index print Best Photo Fast Print a memory card indexPhoto Set up the MFP and use it on the network Set up the MFP and use it on the network Manage the network View network settingsRestore the network defaults Change network settingsManually configure a static IP address Network configurationConfiguration IP configurationAutomatic configuration Link speed settingsSupported network protocols Service name DescriptionIP address Internet Protocol IPTransmission Control Protocol TCP User Datagram Protocol UDPSubnet mask Configure IP parametersDynamic Host Configuration Protocol Dhcp SubnetsVerify that the MFP is on and online Problem SolvingDefault gateway GatewaysAutoip Resolve communication problems with the networkEnww Enww How do I? HP Color LaserJet CM1017 MFP control panel features Control panel and other settings How do I?Use the graphical display HP Color LaserJet CM1017 MFP Enww Control-panel menus 2Reports Menu 4System Setup Menu 5Service Menu 5Service Menu System Settings Print How do I?Device information Print density Print density settings DescriptionPaper handling Print qualitySet the system password To remove the system passwordTo reset all MFP settings to factory defaults Print Settings Memory card HP Color LaserJet CM1017 MFP only Control print jobsPCL5c PostScriptPrinter-driver features Selecting print media settingsPrint from Windows Printer-driver settingsEnvelopes Special media for printingLetterhead or preprinted forms LabelsTransparencies Glossy paper and photo paperHeavy paper Copy and Scan How do I? Scan from the device control panelProgram the device Scan To button from the control panel Copy and Scan How do I? Print and scan photos from a proof sheet Enable or disable a memory cardPhoto How do I? HP Color LaserJet CM1017 MFP only Print photos directly from the memory cardSave photos to the workstation from a memory card Restore the network defaults Network How do I? HP Color LaserJet CM1017 MFP onlyFind the network IP address Set the system password Maintenance How do I?Clean the scanner glass Change MFP toner warningsCalibrate the MFP Clean the MFP Calibrate the MFP from the front control panelCalibrate the MFP from the HP ToolboxFX Clean the paper path using HP ToolboxFX Managing and maintaining the multifunction peripheral MFP Demo ConfigurationTo print the Configuration page from the control panel Information pagesInformation pages To print the Supplies Status page from the control panel Supplies StatusNetworking page HP Color LaserJet CM1017 MFP only Fonts pages UsageTo print a fonts page from the control panel Enww To print a menu map Menu mapView HP ToolboxFX HP ToolboxFXEvent log StatusHelp Set up status alertsSet up e-mail alerts AlertsSystem Settings Paper handling Set the system password Print Settings Network settings Access the embedded Web server using a network connection Use the embedded Web serverWindows Macintosh Information tab Settings tabOther links found in HP ToolboxFX Networking tabSupplies life Check supply status and order using the control panelCheck and order supplies using HP ToolboxFX Manage suppliesReplace and recycle supplies Check and order supplies using HP Solution CenterReset the MFP for non-HP supplies Supplies Storage GuidelinesHP anti-counterfeit supplies Web site Clean the scanner glass Clean the paper path using HP ToolboxFX Clean the MFPOn-going operation Cartridge-out overrideChange the print cartridge Change print cartridgesChange print cartridges Enww Enww Calibrate the MFP Calibrate the MFP from the front control panelCalibrate the MFP from the HP ToolboxFX Problem solving Problem solving process Problem solving checklistStep Verification step Possible problems Solutions Number Card? Computer?Control-panel messages Control panel message Description Recommended action Turn off then turn on Fan ErrorCleaning Device errorHP supplies InstalledInstall color cartridge Install black cartridgeMemory low Are disabled Memory is low. Press OKMemory card is unsupported Memory card slotsReady Non-HP color installedNon-HP supply UseReplace supply Scanner ErrorScanning error Unknown Memory Card ErrorGeneral print quality issues Solve print problemsPrint-quality problems Print-quality checklistProblem Cause Solution Problem Cause Configuration page. If so, contact See Load trays Solve issues with printing color documentsAaBbCc Media-handling problems Solve print-media problemsPrint-media guidelines Or from a faulty paper lot Performance problems See Media-handling problems Calibrate the MFP Resolve copy problemsMFP Use the table to solve image-scan issues Resolve scanning problemsResolve scan-quality problems using the table Enww Was the device exposed to an electric or magnetic field? Clear paper jams Where to look for jamsClear jams from inside the MFP Enww Clear jams from tray output area Clear jams from the back of the MFP Clear jams from tray 2 or optional tray Slide the tray into the MFP Open and close the front door HP ToolboxFX Additional problem solving toolsService menu Device pages and reportsCalibrate the MFP Clean the paper pathTo restore the factory-set defaults To clean the paper pathEnww Work with memory MFP memory Install memory DIMMs Enww Enww Go to Check Dimm installation Check Dimm installation Enable memoryTo enable memory for Windows Enww Accessories and supplies information Supplies MemoryProduct name Description Part number Paper handling accessories Cable and interface accessoriesUser-replaceable parts Paper and other print mediaLanguage Part number Supplementary DocumentationEnww Service and support Hewlett-Packard limited warranty statement Print Cartridge Limited Warranty Statement HP Customer Care Online troubleshooting toolsHP Care Pack Services and Service Agreements Availability of support and serviceRepack the MFP Repacking the MFPWHO is Returning the EQUIPMENT? Service information formEnww Specifications Rated current Multifunction peripheral MFP specificationsPower requirements Volt modelsSound Power Level Declared Per ISO Category SpecificationsRecommended1 Operating1 Storage1 When heated to 210C 410F for 0.1 second Regulatory information Introduction FCC regulations Ozone production Power consumptionEnvironmental Product Stewardship program Protecting the environmentReturns Extended warranty Material safety data sheetDeclaration of Conformity Declaration of conformityKorean EMI statement Vcci statement Japan Country/region-specific safety statementsLaser safety statement Canadian DOC statementJapanese Power Cord Statement Laserturvallisuus Luokan 1 Laserlaite Klass 1 Laser Apparat Finnish laser statementIndex Symbols/NumericsGateways DimmBootp MFP FCC WIA TCP Enww Page CB394-90907* *CB394-90907

Related manuals

Manual 2 pages 8.32 Kb