NOTE The change in the setting remains active for about two minutes after the copy job has been completed. During this time, Settings=Custom appears on the device
Change the default media size in the media input tray to match the output size, or part of the copy can be cut off.
Copy edge-to-edge originals
NOTE The printed or copied page has a border of approximately 4 mm (1/6 of an inch). The HP Color LaserJet CM1015/CM1017 MFP does not support
Considerations for printing or scanning documents with cropped edges:
●When the original is smaller than the output copy size, move the original 4 mm (1/6 inch) away from the bottom and right edges of the scanner glass. Recopy or scan in this position.
●When the original is the size of the desired output, make a copy with smaller edges by:
●Select Reduce/Enlarge, and press the navigation arrows to select Full Page=91%, then press Start Copy Black or Start Copy Color.
The edges and the copy are reduced in size by up to 2 mm.
ENWW | Copy paper 75 |