Chapter 4
Make sure you have the following materials available:
•Dry foam rubber swabs,
TIP: Coffee filters are
•Distilled, filtered, or bottled water (tap water might contain contaminants that can damage the ink cartridges).
CAUTION: Do not touch the
To clean the area around the ink nozzles
1.Turn on the printer and open the front access cover. The print carriage moves to the center of the printer.
2.Wait until the print carriage is idle and silent, and then unplug the power cord from the back of the device.
3.Lift the ink cartridge latch open and gently remove the ink cartridge from its cradle compartment.
NOTE: Do not remove both ink cartridges at the same time. Remove and clean each ink cartridge one at a time. Do not leave an ink cartridge outside the printer for more than 30 minutes.
4.Place the ink cartridge on a piece of paper with the ink nozzles facing up.
5.Lightly moisten a clean foam rubber swab with distilled water, and squeeze any excess water from it.
6.Clean the face and edges around the ink nozzle area with the swab, as shown below.
1Nozzle plate (do not clean)
2Face and edges around the ink nozzle area
CAUTION: Do not clean the nozzle plate.
7.Insert the ink cartridge into its cradle compartment at the same angle at which you removed the old ink cartridge.
56 Solve a problem