Regulatory information
HP POD 20c regulatory compliance
The HP POD 20c complies with the following regulatory standards.
Standard | Certification level | Standard title |
|
|
|
IEC/EN | "Intertek Tested and | • IEC/EN |
60950 | Certified" | Equipment, Part 1: General Requirements, Issue: 2006 |
|
| • IEC/EN |
|
| Equipment, Part 22: Equipment to be Installed Outdoors, Issue: |
|
| 2006 |
|
|
|
IBC 2009 | Designed to Comply | 2009 International Building Code, © 2010 International Code |
| With the applicable | Council, Inc. |
| requirements |
|
Safety and IEC compliance
The HP POD 20c is examined, tested, and found to be in compliance with IEC/EN 60950 Part 1 and Part 22 as an Information Technology Product. For more information, see "HP POD 20c regulatory compliance (on page 79)."
The HP POD 20c is not suitable for
IMPORTANT: Before installing the HP POD 20c, consult your local Authorities for applicable regulations and to review
Additional considerations for safety and Electrical compliance are as follows:
•The HP POD 20c is Certified as an Information Technology Product to IEC/EN 60950 Part 1 and Part 22.
•The HP POD 20c is evaluated as a
•The electrical connections of the HP POD 20c are evaluated as feeder connections for connection to an existing facility, and are not suitable as "service entrance" for connection to the utility.
•The HP POD 20c is designed for stationary installation outdoors in a Pollution Degree 3 environment, in restricted access locations, with field wiring terminals provided for permanent supply connections.
•The HP POD 20c meets the following ratings.
Feature | Specification |
|
|
Category | Rated Overvoltage Category III |
Protection | Surge protection device |
Regulatory information 79