HP 8753ET specifications, Test-port output characteristics

HP 8753ET specifications

Test-port output characteristics

Frequency characteristics

Range	300 kHz to 3 GHz
Option 006 300 kHz to 6 GHz
Resolution	1 Hz
Stability4	±7.5 ppm (0˚ to 55 ˚C)

	±3 ppm/year
Option 1D5 ±0.05 ppm (0˚ to 55 ˚C)
	±0.5 ppm/year
Accuracy	±10 ppm at 25 ˚C ±5 ˚C
Power range:	-20 to +5 dBm
	-85 to +10 dBm (with Option 004)
Resolution	0.01 dB
Level accuracy1	±1.0 dB
Level linearity1
Standard
-20 to -15 dBm	±0.5 dB
-15 to 0 dBm	±0.2 dB
0 to +5 dBm	±0.5 dB
Option 004
-15 to +5 dBm	±0.2 dB
+5 to +10 dBm	±0.5 dB
Impedance	50 Ω (nominal)
300 kHz to 3 GHz >18 dB RL (< 1.28 SWR)
3 GHz to 6 GHz	> 14 dB RL (<1.50 SWR)
Spectral purity
2nd harmonic2
	<-40 dBc at 0 dBm4
	<-50 dBc at -10 dBm4
Option 002	<-25 dBc at maximum output
	power
3rd harmonic3
	<-40 dBc at 0 dBm
	<-50 dBc at -10 dBm
Option 002	<-25 dBc at maximum output
	power
Nonharmonic spurious
Mixer related	<-30 dBc at +10 dBm
	<-55 dBc at -10 dBm

Test port input characteristics

Frequency range	300 kHz to 3 GHz
Option 006	300 kHz to 6 GHz
Average noise level
300 kHz to 3 GHz	<-90 dBm (3 kHz BW)
300 kHz to 3 GHz	<-110 dBm (10 Hz BW)
300 kHz to 3 GHz	<-120 dBm (10 Hz BW) typical
3 GHz to 6 GHz	<-85 dBm (3 kHz BW)
3 GHz to 6 GHz	<-105 dBm (10 Hz BW)
3 GHz to 6 GHz	<-114 dBm (10 Hz BW) typical
Maximum input level	+10 dBm reflection port
	0 dBm transmission port
Damage level	>+26 dBm or 35 VDC
Impedance	50 Ω (nominal)
Frequency response5
300 kHz to 3 GHz	±1.0 dB
3 GHz to 6 GHz	±2.0 dB
Harmonics (Option 002)
2nd harmonic2	<-15 dBc at +8 dBm
	<-30 dBc at 0 dBm4
	<-45 dBc at -15 dBm4
3rd harmonic3	<-30 dBc at +8 dBm
	<-50 dBc at 0 dBm4
	<-50 dBc at -15 dBm4
Harmonic measurement accuracy5
300 kHz to 3 GHz	±1.5 dB
3 GHz to 6 GHz	±3 dB (Option 006)
Harmonic measurement dynamic range4
-40 dBc	(output = -10 dBm,
Frequency offset mode6	input = <-15 dBm)

Frequency range		300 kHz to 3 GHz
Option 006		300 kHz to 6 GHz
R-channel input requirements
Power level
300 kHz to 3 GHz		0 to -35 dBm
3 GHz to 6 GHz		0 to -30 dBm
LO Spectral purity
Maximum spurious		<-25 dBc
input
Residual FM		<20 kHz
LO frequency accuracy6		±1 MHz at nominal
		frequency

1.Relative to -5 dBm output power for the HP 8753ET; -10 dBm output power for HP 8753ET with Option 004.

2.16 MHz to 3 GHz.

3.16 MHz to 2 GHz.

4.Typical performance.

5.25˚ C ±5˚ C.

6.The HP 8753ET source characteristics and measurement accuracy in this mode are dependent on the stability of the external LO source. The RF source tracks the LO to maintain a stable IF signal at the R-channel receiver input. Degradation in accuracy is negligible when using an HP 8642A/B, 8656B, or E4432B RF signal generator as the LO source.