Verification kits, Test-port return cables

Verification kits

Measuring known devices other than the standards used in calibration is an easy way to verify the proper operation of an HP 8753ES measurement system. HP offers verification kits which include devices, with data, for verifying the error-corrected measurements of an HP 8753ES and 50-ohm test sets.

HP 85029B 7-mm verification kit

Contains a set of precision 7-mm devices, with data traceable to NIST* for verifying the calibrated perfor- mance of an HP 8753E measurement system.

The HP 85031B 7-mm calibration kit is required for complete verification.

Test-port return cables

Hewlett-Packard offers high-quality RF cables to con- nect the HP 8753ET/ES and test sets to devices under test. These cables offer excellent RF shielding for high- dynamic-range measurements.

HP 11851B 50-ohm type-N RF cable kit

Recommended for use with the HP 11850C/D three- way power splitters. Kit includes three phase-matched 610-mm (24-in.) cables and one 860-mm (34-in.) cable.

Return loss	> 24 dB to 3 GHz
Phase tracking	±4˚ at 1.3 GHz

HP 8120-5639 50-ohm type-N RF cable

A 50-ohm type-N test port cable (both connectors are type-N male).

Return loss

> 30dB to 6 GHz

HP 11857B 75-ohm type-N test port return cables

A pair of 610-mm (24-in.) test port return cables for use with the HP 8753ES or HP 85046B 75-ohm S-para- meter test set.

Return loss	> 24 dB to 2 GHz
Phase tracking	±2˚ at 1.3 GHz

HP 11857D 7-mm test-port return cables

A pair of 610-mm (24-in.) test port return cables for use with the HP 8753ES with the HP 85046A and 85047A S-parameter test sets. These cables can be used with connector types other than 7-mm with the appropriate precision adapters.

Return loss	> 24 dB to 3 GHz
	> 20 dB to 6 GHz
Phase tracking	±2˚ at 1.3 GHz

HP 11857F type-F test-port return cables Type-F test port cable set (75-ohm). Includes one cable with type-N(male) to type-F(male) connectors and one cable with type-N(male) to type-F(female) connectors.

HP 11850C/D three-way power splitters

		HP 11850C			HP 11850D
Impedance		50 ohms			75 ohms
Frequency range		DC to 3 GHz			DC to 2 GHz
Tracking		±25 dB, ±3˚			±2 dB, ±2.5˚
Equivalent		30 dB at 1.3 GHz			30 dB at 1.3 GHz
source match		30 dB at 1.3 GHz			30 dB at 1.3 GHz
(ratio or leveling) 20 dB at 3 GHz					20 dB at 2 GHz
Nominal		9.5 dB + 1 dB/GHz			7.8 dB
insertion loss
Input port match
DC to 1.3 GHz		20 dB			20 dB
1.3 GHz to Fmax		10 dB			10 dB
Maximum		+20 dB			+20 dB
operating level		+20 dB			+20 dB
Damage level		+30 dB			+30 dB
RF connectors
RF input	50-ohm type-N (f)			50-ohm type-N(f)
All others	50-ohm type-N (f)			75-ohm type-N(f)
Includes		Three HP 11852B 50-to 75-ohm
		minimum-loss pads
Recommended accessories
		HP 11851B RF cable kit
HP 11667A 50-ohm power splitter
Frequency range			DC to 18 GHz
Typical insertion loss			6 dB
Equivalent source match
DC to 4 GHz			26 dB
4 GHz to 8 GHz			21 dB
8 GHz to 18 GHz			17 dB
Tracking
(between output arms)
DC to 4 GHz			±15 dB
4 GHz to 8 GHz			±2 dB
8 GHz to 18 GHz			±25 dB
Maximum operating level			±27 dBm
Connectors			50-ohm type-N (f)
Option 001
RF input			type-N (m)
Outputs			type-N (f)
Option 002
RF input			type-N (f) on RF
Outputs			precision 7-mm
Dimensions			46 mm H x 52 mmW x
			19 mm D
			(1.8 x 2.0 x 0.7 in)

Recommended accessories

HP 11851B RF cable kit

HP 11852B 50-ohm to 75-ohm minimum loss pad

Frequency range	DC to 3.0 GHz
Nominal insertion loss	5.7 dB
Return loss
300 kHz to 2 GHz	32 dB
2 GHz to 3 GHz	27 dB
Maximum input power	250 mW (+24 dBm)