HP 8753ET manual HP 8347A RF amplifier, Dimensions, Weight

Page 28

HP 8347A RF amplifier

The HP 8347A RF amplifier delivers increased power across a 300 kHz to 3 GHz frequency range.

The HP 8347A provides leveled output power without using an external coupler and detector, since these parts are built-in. The external ALC can be directly connected to the external AM input on the HP 8753ET/ES. This capability is especially useful for achieving high dynamic range measurements at faster sweep rates.

Specifications

100 kHz to 3 GHz

Frequency

Gain

25 dB minimum

Output power (leveled)

+5 dBm to +20 dBm

 

(adjustable)

Maximum output power

24 dBm (typical)

Leveled power flatness

±1.5 dB

Impedance

50 ohms nominal

SWR

2.2:1 max

Input

Output

1.6:1 (ALC on)

Spectral purity

-20 dBc at dBm

Harmonics

Third-order intercept

+30 dBm (nominal)

Typical noise figure

 

100 MHz to 3 GHz

13.5 dB

RF connectors

Type-N female

Dimensions

102-mm H x 213-mm

 

W x 297-mm D

Weight

(4.0 in x 8.4 in x 11.7 in)

net 3.5 kg (7.7 lb)

MS-DOS is a U.S. registered trademark of Microsoft Corporation. Pentium is a U.S. registered trademark of Microsoft Corporation.

For more information about Hewlett-Packard test and measure- ment products, applications, services, and for a current sales office listing, visit our web site, http://www.hp.com/go/tmdir. You can also contact one of the following centers and ask for a test and measurement sales representative.

United States:

Hewlett-Packard Company

Test and Measurement Call Center P.O. Box 4026

Englewood, CO 80155-4026 1 800 452 4844

Canada:

Hewlett-Packard Canada Ltd. 5150 Spectrum Way Mississauga, Ontario L4W 5G1 (905) 206 4725

Europe: Hewlett-Packard European Marketing Centre P.O. Box 999

1180 AZ Amstelveen The Netherlands (31 20) 547 9900

Japan:

Hewlett-Packard Japan Ltd.

Measurement Assistance Center

9-1, Takakura-Cho, Hachioji-Shi,

Tokyo 192, Japan

Tel: (81) 426-56-7832

Fax: (81) 426-56-7840

Latin America:

Hewlett-Packard

Latin American Region Headquarters 5200 Blue Lagoon Drive, 9th Floor Miami, Florida 33126, U.S.A.

(305) 267 4245/4220

Australia/New Zealand: Hewlett-Packard Australia Ltd.

31-41 Joseph Street

Blackburn, Victoria 3130, Australia 1 800 629 485

Asia Pacific:

Hewlett-Packard Asia Pacific Ltd 19/F Cityplaza One

1111 King's Road

Taikoo Shing, Hong Kong tel: 852-2599-7777

fax: 852-2506-9285

Data Subject to Change Copyright © 1999 Hewlett-Packard Company Printed in U.S.A. 8/99 5968-5160E

28

Page 27 Page 28
Image 28
Page 27 Page 28
Contents Specifications Table of contents Measurement port characteristics Definitions and test conditionsDynamic range Measurement uncertaintySystem performance summaries HP 8753ES 50-ohm systemsMm test ports Network analyzer HP 8753ESType-N test ports Calibration kit HP 85032B Test-port cables HP 11857DCalibration kit HP 85033D Test-port cables HP 11857D Frequency rangeNetwork analyzer HP 8753ES 75-ohm systemsCalibration kit HP 85036B Test-port cables HP 11857B Type-F test ports Calibration kit HP 85039B Test-port cables HP 11857BMeasurement port characteristics KHz to 16 MHz 100 dB MHz to 3 GHz 110 dB GHz to 6 GHz 105 dBTest-port output characteristics7 HP 8753ES specificationsTest port input characteristics Characteristics Phase characteristicsCW time sweep only KHz to 6 GHzTest port output characteristics HP 8753ES Option 011 specificationsTest port input characteristics Option KHz to 3 GHz To -35 dBm GHz to 6 GHz To -30 dBm 20 kHzFrequency CW time sweep onlyHP 8753ET specifications Test-port output characteristicsKHz to 3 GHz Option 006 300 kHz to 6 GHzTest-port input characteristics Magnitude characteristics±500 dB ±180˚HP 8753ET/ES supplemental characteristics Group delay characteristicsMeasurement Source controlData averaging Data accuracy enhancementDisplay control Trace functions StorageData hardcopy System capabilitiesRemote programming Test sequencesTime-domain Option This stimulus is also used to measure low-pass devicesGeneral characteristics Options HP 85046A/B Specifications Test set specifications for OptionHP 85046A/B S-parameter test sets Specifications HP 85047A S-parameter test set+20 dBm +30 dBmAccessories HP 85039B type-F calibration kit Specifications HP 85038 family of calibration kitsHP 11906B 7-16 to 50-Ohm type-N adapter kit HP 11906C 7-16 to 7-mm adapter kitVerification kits Test-port return cablesRF limiter Ohm accessory kitsHP 85024A high-frequency probe Weight DimensionsHP 8347A RF amplifier

8753ET specifications

The HP 8753ET is a sophisticated vector network analyzer designed to meet the demands of RF and microwave engineering applications. This instrument is renowned for its ability to provide high-performance measurements in a compact form factor, making it a favorite among engineers and technicians alike.

One of the main features of the HP 8753ET is its ability to perform a wide array of network analysis functions. It supports S-parameter measurements, allowing for the characterization of the linearity and performance of RF circuits. With the ability to measure reflection, transmission, and impedance characteristics, users can gain deep insights into their device under test (DUT).

An essential aspect of the HP 8753ET is its frequency range capability. It typically covers frequencies from 300 kHz to 6 GHz, which is ideal for a vast range of applications, including telecommunications, radar, and electronic warfare.

The HP 8753ET is equipped with advanced analysis features such as time-domain reflectometry (TDR) and gating capabilities. This enables engineers to identify and analyze impedance mismatches and faults over a defined time window, helping to troubleshoot and optimize RF systems effectively.

Another notable technology integrated into the HP 8753ET is its user-friendly interface that combines an easy-to-navigate display with direct access to measurement functions. This minimizes the learning curve for new users while enhancing productivity for experienced professionals.

The analyzer also supports various calibration techniques, ensuring accurate and repeatable measurements. The built-in calibration kits help improve the reliability of the results while compensating for any systematic errors associated with the test setup.

Additional characteristics of the HP 8753ET include its capability for both single-port and two-port measurements. This versatility allows users to conduct a complete array of S-parameter measurements with confidence.

Furthermore, the HP 8753ET features a storage function that allows users to save and recall measurement setups and results. This capability streamlines workflows and provides easy access to historical data for review or further analysis.

Ultimately, the HP 8753ET stands out as an essential tool for engineers in the RF and microwave domain. Its combination of high-performance measurement capabilities, an intuitive interface, and flexibility makes it a preferred choice for anyone seeking reliable and thorough network analysis in their testing and development projects.
Top Page Image Contents