HP 8753ET manual Calibration kit HP 85033D Test-port cables HP 11857D, Frequency range

Page 6

System performance summaries

HP 8753ES (50-ohm systems)

3.5-mm test ports

Configuration
Network analyzer	HP 8753ES
	Standard and Option 006
Calibration kit	HP 85033D
Test-port cables	HP 11857D
System dynamic range
30 kHz to 50 kHz	70 dB1
50 kHz to 300 kHz	90 dB1
300 kHz to 16 MHz	100 dB
16 MHz to 3 GHz	110 dB
Option 014	108 dB
3 GHz to 6 GHz	105 dB
Option 014	103 dB

Reflection uncertainty

Magnitude

Transmission uncertainty

Magnitude

1.Typical below 300 kHz.

2.Typical performance.

Measurement port characteristics

Frequency range

Corrected 30 kHz-300 kHz2 300 kHz-1.3 GHz			1.3 GHz-3 GHz	3 GHz-6 GHz
Directivity	49 dB	46 dB	44 dB	38 dB
Source match	49 dB	44 dB	41 dB	37 dB
Load match	49 dB	46 dB	44 dB	38 dB
Reflection	±(0.010 dB	±(0.005 dB	±(0.007 dB	±(0.009 dB
tracking	+0.02/˚C)	+0.01/˚C)	+0.02/˚C)	+0.03/˚C)
Transmission	±(0.016 dB	±(0.014 dB	±(0.022 dB	±(0.048 dB
tracking	+0.02/˚C)	+0.01/˚C)	+0.02/˚C)	+0.03/˚C)

Phase

Image 6

Contents Specifications Table of contents Dynamic range Measurement port characteristicsDefinitions and test conditions Measurement uncertaintyMm test ports System performance summariesHP 8753ES 50-ohm systems Network analyzer HP 8753ESType-N test ports Calibration kit HP 85032B Test-port cables HP 11857DCalibration kit HP 85033D Test-port cables HP 11857D Frequency rangeHP 8753ES 75-ohm systems Network analyzerCalibration kit HP 85036B Test-port cables HP 11857B Type-F test ports Calibration kit HP 85039B Test-port cables HP 11857BMeasurement port characteristics KHz to 16 MHz 100 dB MHz to 3 GHz 110 dB GHz to 6 GHz 105 dBHP 8753ES specifications Test-port output characteristics7Test port input characteristics CW time sweep only CharacteristicsPhase characteristics KHz to 6 GHzHP 8753ES Option 011 specifications Test port output characteristicsTest port input characteristics Option Frequency KHz to 3 GHz To -35 dBm GHz to 6 GHz To -30 dBm20 kHz CW time sweep onlyKHz to 3 GHz HP 8753ET specificationsTest-port output characteristics Option 006 300 kHz to 6 GHz±500 dB Test-port input characteristicsMagnitude characteristics ±180˚Measurement HP 8753ET/ES supplemental characteristicsGroup delay characteristics Source controlData accuracy enhancement Data averagingDisplay control Data hardcopy Trace functionsStorage System capabilitiesTime-domain Option Remote programmingTest sequences This stimulus is also used to measure low-pass devicesGeneral characteristics Options Test set specifications for Option HP 85046A/B SpecificationsHP 85046A/B S-parameter test sets +20 dBm SpecificationsHP 85047A S-parameter test set +30 dBmAccessories HP 11906B 7-16 to 50-Ohm type-N adapter kit HP 85039B type-F calibration kit SpecificationsHP 85038 family of calibration kits HP 11906C 7-16 to 7-mm adapter kitVerification kits Test-port return cablesOhm accessory kits RF limiterHP 85024A high-frequency probe Dimensions WeightHP 8347A RF amplifier

8753ET specifications

The HP 8753ET is a sophisticated vector network analyzer designed to meet the demands of RF and microwave engineering applications. This instrument is renowned for its ability to provide high-performance measurements in a compact form factor, making it a favorite among engineers and technicians alike.

One of the main features of the HP 8753ET is its ability to perform a wide array of network analysis functions. It supports S-parameter measurements, allowing for the characterization of the linearity and performance of RF circuits. With the ability to measure reflection, transmission, and impedance characteristics, users can gain deep insights into their device under test (DUT).

An essential aspect of the HP 8753ET is its frequency range capability. It typically covers frequencies from 300 kHz to 6 GHz, which is ideal for a vast range of applications, including telecommunications, radar, and electronic warfare.

The HP 8753ET is equipped with advanced analysis features such as time-domain reflectometry (TDR) and gating capabilities. This enables engineers to identify and analyze impedance mismatches and faults over a defined time window, helping to troubleshoot and optimize RF systems effectively.

Another notable technology integrated into the HP 8753ET is its user-friendly interface that combines an easy-to-navigate display with direct access to measurement functions. This minimizes the learning curve for new users while enhancing productivity for experienced professionals.

The analyzer also supports various calibration techniques, ensuring accurate and repeatable measurements. The built-in calibration kits help improve the reliability of the results while compensating for any systematic errors associated with the test setup.

Additional characteristics of the HP 8753ET include its capability for both single-port and two-port measurements. This versatility allows users to conduct a complete array of S-parameter measurements with confidence.

Furthermore, the HP 8753ET features a storage function that allows users to save and recall measurement setups and results. This capability streamlines workflows and provides easy access to historical data for review or further analysis.

Ultimately, the HP 8753ET stands out as an essential tool for engineers in the RF and microwave domain. Its combination of high-performance measurement capabilities, an intuitive interface, and flexibility makes it a preferred choice for anyone seeking reliable and thorough network analysis in their testing and development projects.