HP BOOK XE3 manual Running the Bios Setup Utility, Bios Setup Menus and Parameters, Default

Page 100

BIOS Setup Utility

The BIOS Setup utility provides access to basic configuration settings. It is independent of the operating system.

Running the BIOS Setup Utility

1.Close all applications, then click Start, Shut Down, Reboot. (If necessary, you can press CTRL+ALT+DEL to reboot.)

2.When the HP logo appears, press F2 to enter the BIOS Setup utility.

3.The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate:

Press the LEFT and RIGHT arrow keys to move among menus.

Press the UP and DOWN arrow keys to move among parameters in a menu.

Press F5 or F6 to move through values for the current parameter, or press ENTER to change a setting.

4.After you select the options you want, press F10 or use the Exit menu to exit BIOS Setup.

If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS Setup again, and marks the conflicting settings.

Table 3-1. BIOS Setup Menus and Parameters

OmniBook XE3: Introduced with BIOS version GC.M1.00 (Summer 2000).

Main Menu

Description

BIOS Revision

Shows the current BIOS version.

 

 

System Time

Sets the time using 24-hour format. Values set take effect

 

immediately.

Default

Detected automatically

System Date

Floppy Drive

Internal Hard Disk

Quiet Boot

Sets the date using mm/dd/yy format.

Sets the floppy drive type.

Sets the hard disk drive type and various drive parameters.

When enabled, hides summary of power-on self-test and messages during boot.

Detected and set automatically

Detected and set automatically

Enabled

Video Display Device

Sets whether the notebook automatically switches to an

 

external display if one is detected (Auto), or uses both the

 

built-in and external displays (Both).

Video Expansion

When enabled, the video image covers the entire display in

 

lower resolution modes. When disabled, the video image is

 

centered in the display.

Television Type

NTSC or PAL standard.

Base Memory

Shows the system memory size.

Extended Memory

Shows the extended memory size.

 

 

CPU Serial Number

When enabled, makes Intel CPU serial number available to

 

software.

Auto

Disabled

NTSC

640 KB

Detected automatically

Enabled

3-30 Troubleshooting and Diagnostics

HP OmniBook XE3

Image 100
Contents Page Edition History Contents Troubleshooting and Diagnostics Figures Tables Introduction SourceAddress or Number CommentsPage OmniBook XE3 Series Models ProductTechnology code Product name Technology CodesDetails Features Top/Right ViewFront View Bottom View Operation Activating Power ModesTurning the Notebook On and Off Checking the Notebook’s Status Status LightsIndicator Meaning Power statusBattery status Caps LockUsing Fn Hot Keys Fn Hot KeysHot Key EffectResetting the Notebook Resetting the NotebookUsing the CD-ROM or DVD Player Multimedia ButtonsSpecifications Hardware SpecificationsXE3 Series Hardware Specifications Power Mass StorageOptions Keyboard ModemSoftware Specifications XE3 Series Software SpecificationsMechanical Features Standards Environmental Limits Operating Software ApplicationsSystem Interrupts System ResourcesSystem Memory System Input/Output Addresses 100-3FF DMA ChannelsXE3 Series Accessories Replaceable Module Diagram Internal DesignFunctional Structure Docking portComponents Used Component RolesPage Removal Cross-Reference Disassembly Flowchart Disassembly FlowRequired Equipment Recommended Screw TorquesScrew Thread Size Torque cm-kgf Torque in-lbfRemoving the Battery Removal ProcedureRemoving an Sdram Module Removing the Sdram CoverPull the module out of the connector Removing the Mini-PCI PCA Removing the Mini-PCI Card Reassembly Notes Removing the Keyboard Cover with Hinge Covers Removing the Keyboard Cover Retaining ScrewsRemoving the Keyboard Cover Reassembly Notes Removing the Keyboard Loosening the Keyboard Retaining ScrewsDisconnecting the Keyboard Cable Reassembly Notes Removing the Hard Disk Drive Assembly 10. Removing the Hard Disk Drive11. Removing the Hard Disk Carrier Recovering and Reinstalling Software To recover the factory software installationReplacing Small Parts Replacement ProcedureReplacing Small Parts User-Replaceable Removing the Display Assembly HP Authorized Service Providers Only12. Removing the Display Reassembly Notes Installing a New Display Assembly ModelRemoving the Top Case 14. Removing the Top Case Retaining ScrewsRelease the CD player PCA cable from the motherboard Removing the CD Player PCA 16. Removing the CD Player PCARemoving the Hinge Saddle Set 17. Removing the Hinge Saddle Retaining Screws18. Removing the Hinge Saddle Reassembly Notes Removing the Video PCA 19. Removing the Video PCA Reassembly Notes Removing the Heatsink Assembly with Fan 20. Removing the Heatsink Assembly Reassembly Notes Removing the CPU Module 21. Removing the CPU Module Reassembly Notes Removing the Floppy Disk Drive 22. Removing the Floppy Disk Drive Reassembly Notes 23. Removing the CD-ROM/DVD Drive Reassembly Notes Removing the CD-ROM/DVD DriveWhen Installing a New Motherboard Removing the Motherboard or Bottom CaseRemoval Procedure 24. Removing the Motherboard Reassembly Procedure Reinstalling the Motherboard Installation Procedure Replacing the Bottom Case27. Example of Serial Number Label Removing Notebook Components Removing Notebook ComponentsAdditional Steps HP OmniBook XE3 Removal and Replacement Removal and Replacement HP OmniBook XE3 HP OmniBook XE3 Troubleshooting and Diagnostics Troubleshooting Basic Troubleshooting StepsTroubleshooting the Problem Verifying the RepairSuggestions for Troubleshooting Scope of Diagnostic ToolsSymptom Troubleshooting SuggestionsStartup Power/Battery Call Center SuggestionsRepair Center Likely Causes Repair Center CommentsDisplay Call Center Suggestions White display Erratic display Symptom Floppy drive CD-ROM/DVDSymptom Touch pad MouseModem One-Touch button problems LAN/Network Symptom PC card MiscellaneousSymptom Call Center Suggestions Symptom Port replicator DiagTools Diagnostic Program Diagnostic ToolsUpdating DiagTools Enter Running DiagToolsSerial and Parallel Loopback Connectors DiagTools Error Codes Interpreting the ResultsFloppy Disk Tests Smbus Tests Code Post Terminal-Error Beep Codes Power-On Self-TestBeep Codes Post Description Post Messages MessageMessage Description Failing Bits nnnnSycard PCCtest Commands Sycard PCCtest 450 CardBus Card OptionalXE3/N5000 Technology code GC SlotContents of the DMI Package Installing the DMI PackageDesktop Management Interface DMI Uninstalling the DMI Package Using the DMI InterfaceDescription of DMI Bios Setup Utility Running the Bios Setup UtilityBios Setup Menus and Parameters DefaultSystem Devices Menu Security MenuUpdating the Notebook’s Bios Power MenuBoot Menu Exit MenuHP OmniBook XE3 Replaceable Parts Exploded View Replaceable Parts Description Part Number Exchange User ReplExchange Part Number Description Part NumberUser Repl Accessory Replaceable Parts Part Number Reference F2111-69062 F2111-69075 F2111-69076 Exchange Part Number Description Password Removal Policy Hewlett-Packard Display Quality Statement XE3 TFT LCD Guidelines 12.1-in SVGA, 13.3/14.1/15.0-in XGA Type of Imperfection Electrical ImperfectionsMechanical Imperfections Imperfections Not AllowedService Notes Page Qjolvk 3ULQWHGLQ7DLZDQ