HP BOOK XE3 manual Removing the Hinge Saddle Set, Removing the Hinge Saddle Retaining Screws

Removing the Hinge Saddle Set

(HP Authorized Service Providers Only)

Required Equipment

∙Small Phillips screwdriver.

Removal Procedure

1.Unplug the AC adapter, if present, and remove the battery.

2.Remove these additional assemblies:

∙Keyboard cover (page 2-9).

∙Keyboard (page 2-11).

∙Display assembly (page 2-17).

∙Top case (page 2-19).

3.Remove the two retaining screws from the bottom case.

Screws,

M2.5x8 mm

Figure 2-17. Removing the Hinge Saddle Retaining Screws

HP OmniBook XE3 Removal and Replacement 2-23