Symptom
Port replicator
Docking product I/O problems.
Notebook locks up when docking or undocking.
Call Center:
Suggestions
Make sure AC power is connected to port replicator.
Make sure notebook is fully inserted in port replicator.
Check notebook’s power supply.
Check settings in BIOS Setup.
Try using corresponding port on notebook while undocked.
Make sure notebook has completely entered or resumed from standby or hibernate mode before docking or undocking.
Repair Center: Likely Causes
Port replicator. Motherboard.
Repair Center:
Comments
Test corresponding notebook ports while undocked.
Port replicator is not repairable, and must be exchanged.
HP OmniBook XE3 |