HP 600 C2184A manual Two Ways to Use the Control Panel, To align the print cartridges

To align the print cartridges:

1.Type DJCP at the DOS prompt to open the stand-alone Control Panel for DOS.

2.Select Align Print Cartridges and follow the on-screen instructions.

Two Ways to Use the Control Panel

The DOS Control Panel can run either as a stand-alone application or as a memory resident application. To run the DOS Control Panel as a stand alone application: type DJCP at the DOS prompt.

The DOS Control Panel must be loaded into memory at start-up to work as a memory resident application.

To set up the Control Panel for DOS as a memory resident application:

1.Type DJCP at the DOS prompt to open the stand-alone DOS Control Panel.

2.Select More Settings.

3.Select Memory Resident Functions.

4.Select Make Memory Resident.

5.Select Done and reboot the computer.

To open the memory resident Control Panel for DOS: type the DOS Control Panel hot key.

The memory resident Control Panel for DOS is a subset of the stand-alone application due to memory considerations.