Toshiba RAS-10YKV-E, RAS-13YKV-E, RAS-10YAV-E ECONO. operation control, Setting of air flow

(8)ECONO. operation control

When the ECONO. button of the remote control- ler is pushed, quiet and mild operation is per- formed by restraining air flow and operating motor speed.

1)Indoor air flow is controlled between SUL and L– (Low air (–)).

(Settemp.)	3,5
	2,5
	3
–
temp.)	2
(Room	1,5
	1
	0,5

1H2H

2)Setting 10 at 16 rps and 13 at 20 rps as the maximum operating compressor motor speed, the minimum capacity operation range is widened every 1 hour and 2 hours have passed after ECONO. operation had started.

	Compressor motor speed
Air volume	10	13
L–	16 rps	20 rps
{(L–) + (SUL)}/2	15 rps	17 rps

SUL 13 rps 13 rps

Time

Fig. 8-2-4

8-2-2. DRY Operation

(The Remote Controller MODE Button is Set to the DRY Position)

•Once the setting is made, the operation mode is memorized in the microcomputer so that the same operation can be effected thereafter simply by pushing [START/STOP] button.

•Dry operation signal is transmitted to outdoor unit.

•The Cooling operation giving priority to dehumidi- fying, which restrains the indoor fan speed and compressor motor speed, is performed.

•The indoor fan motor operates as shown in Fig. 8-2-5. (Fan speed is AUTO only.)

•The outdoor unit controls the outdoor fan relay R01, R02 and R03, and the compressor motor speed according to the operation command signal sent from the indoor unit.

temp.)(Set	+2,5
	+2,0	L–
–	+1,5
		*1
temp.)
	+1,0
(Room		SUL
	+0,5

Set 0 temp.

–0,5

NOTE :

*1 : Middle motor speed between L– and SUL

Fig. 8-2-5 Setting of air flow

– 29 –