HP Cooktop 10GBE manual Technical specifications, General specifications, Port names

Page 24

Technical specifications

General specifications

Category	Specification

Auto-negotiation standard:	ANSI/IEEE 802.3 Nway Auto-Negotiation

Protocols:	CSMA/CD

Data transfer rates:

Gigabit Ethernet	Full-Duplex: 2000 Mb/s

10Gb Ethernet	Full-Duplex: 20000 Mb/s

Connectors:

10GbE Pass-Thru Module	16 SFP+ module connectors

10Gb multimode fiber optic	62.5/125 or 50/125 microns
cable

10Gb singlemode fiber optic	9/25 micron
cable

Number of ports per module:	16 x 10GbE/1000-Mb/s ports
	1 x serial RS-232 mini-USB to DB-9 front panel management serial port

Port names

Port	Link	Ena	Speed	Neg	Approved

1	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

2	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

3	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

4	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

5	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

6	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

7	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

8	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

9	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

10	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

11	Up/Downlink	Dis/Ena	1Gb/10Gb	On/Off	Yes/No

Technical specifications 24

Image 24

Contents 10GbE Pass-Thru Module User Guide Part Number December 2010 Second EditionIntended audience Contents Electrostatic discharge Features IntroductionPass-thru module architecture XModem Port mapping Dual pass-thru modulesRedundant paths to server bays Resets Component identification10GbE Pass-Thru Module front panel DescriptionDescription Installing the pass-thru module Manually configuring the pass-thru moduleInstalling the module Module securityAccessing the pass-thru module CLI Accessing the pass-thru module CLI remotelyAccessing the pass-thru module CLI locally Production mode CLICommand Result CLI menuInstalling SFP+ transceivers Replacing a pass-thru module Replacing an existing moduleUpdating the 10GbE pass-thru firmware Methods for updating the 10GbE Pass-Thru Module firmwareEnter C. The following message appears Enter R. The following message appearsEnter N. The following message appears Enter y. The following message appearsEnter x. The following message appears Configuration Script Files Usb//d1/test.cfg Updating the firmware image using the serial port Performing a serial firmware image downloadBaud rate 9600 Data bits Parity None Stop bits Flow control For more information Additional referencesTroubleshooting Health LED on the pass-thru module is not onCause Action Try another mini-USB to DB-9 RS232 cable Pass-thru module configuration is corrupt SFP+ transceiver port is disabledDownload fails after starting to download the firmware file Technical specifications General specificationsCategory Specification Port namesPhysical and environmental specifications From WireMini-USB to DB-9 serial adapter pin assignment Shell Braid Technical specifications Regulatory compliance notices Regulatory compliance notices Regulatory compliance notices Electrostatic discharge Preventing electrostatic dischargeGrounding methods to prevent electrostatic discharge Acronyms and abbreviations Media Access Control Network access serverPower-On Self Test Local-area networkIndex Index