•PRIMARY
o Syntax: primary secondary
o Description: Identifies the primary adapter. Supported only in BIND command
•PROBE_BURST_SIZE
o Syntax: probe_burst_size=nnn
o Description: Changes number of probes to send in a retry
•PROBE_CHECK_INTERVAL
o Syntax: probe_check_interval=nnn
o Description: Changes probes check interval
•PROBE_RECHECK_INTERVAL
o Syntax: probe_recheck_interval=nnn
o Description: Changes probe retries check interval
•PROBE_RETRY_COUNT
o Syntax: probe_retry_count=nnn
o Description: Changes probes retry count
•PROBE_SEND_INTERVAL
o Syntax: probe_send_interval=nnn
o Description: Changes probes send interval, nnn counts 1/18 sec
•PROBE_SET_DEFAULT
o Syntax: probe_set_default
o Description: Restores probes settings to factory settings
•PROBES
o Syntax: probes=[on off]
o Description: Enables/disables probes
•PROBES
o Syntax: probes=[BROADCASTMULTICAST]
o Description: Changes probes addressing
•RECOMMIT
o Syntax: recommit [team=nnn]
o Description: Resets a certain mode. Use after hot binding to base drivers with Team=nnn
•REMOVETEAM
o Syntax: removeteam [team=nnn]
o Description: Removes a team. Use after hot binding to base drivers with Team=nnn
•REMOVEVLANID
o Syntax: RemoveVlanID=nnn
o Description: Removes the selected VLAN
•RESET
o Syntax: RESET LBN=nnn
Installation 19