HP 441877-00F manual Parameter Description

Parameter	Description
-UPGRADE or -UP	Downloads the Boot Agent stored within IBAUtil to the adapters in
	the system.
-FLASHENABLE or -FE	Enables Boot ROM. Saves
-FLASHDISABLE or -FD	Disables Boot ROM.
-SAVE	Saves existing Intel Boot Agent and EEPROM settings to a file. The
	file is named based on the PCI Vendor and Device ID of the
	adapter.
-RESTORE	Restores previously saved Intel Boot Agent image. IBAUtil looks for
	a file name based on the PCI Vendor and Device ID of the
	adapter. If -RESTORE is used with -UPGRADE, an error is
	generated.
Power Management Options
-WOLDISABLE or -WOLD	Disables WOL bit on Fast Ethernet and disables APMPME and
	APME EEPROM bits on gigabit.
-WOLENABLE or -WOLE	Enables WOL bit on Fast Ethernet and enables APMPME and
	APME EEPROM bits on gigabit.
-LWSENABLE OR -LWSE	Enables changing the legacy OS Wakeup Support Option on
	10/100 adapters.
-LWSDISABLE OR -LWSD	Disables changing the legacy OS Wakeup Support Option on
	10/100 adapters.
PXE/RPL Configuration Options
-SETUPENABLE or -STE	Enables Setup Menu.
-SETUPDISABLE OR -STD	Disables Setup Menu.
-DEFAULTCONFIG or -DEFCFG	Resets configuration and control words in the EEPROM back to
	default settings.
-TITLEENABLE OR -TLE	Enables initial title message.
-TITLEDISABLE OR -TLD	Disables initial title message.
-PROTOCOLENABLE OR -PROE	Enables changing the boot protocol option.
-PROTOCOLDISABLE OR -PROD	Disables changing the boot protocol option.
-ORDERENABLE OR -ORDE	Enables changing the boot order option.
-ORDERDISABLE OR -ORDD	Disables changing the boot order option.
-SETWAITTIME=X or -SWT=X	Sets the setup delay time for the adapter to X seconds. Valid delay
	times are 0, 2, 3, and 5. Only the first instance of this parameter is
	valid. All other instances of the parameter generate an error.
-RPL BOOT	Sets the network boot protocol to RPL if an RPL image is present in
	the adapter's flash.
-PXE BOOT	Sets the network boot protocol to PXE if a PXE image is present in
	the adapter's flash.
DOS error codes

IBAUtil returns codes to the DOS command line when an error occurs.

•0–Success

•1–Operator termination

Adapter configurations 45