HP 441877-00F manual HP NC-Series Intel adapter diagnostics

•File size %d is too big, max is %d

•Invalid %s

•Failed writing 0x%x to 0x%x

•*1

•*1

•*1

•*1

•Cannot perform task while chip is not running. (need driver)

•Cannot open register define file or content is bad

•ASF Reset bit did not self-cleared

•ATTN_LOC %d cannot be mapped to %cX CPU event bit %d

•%s Register is not cleared to zero after reset

•Cannot start Register Timer

•poll_ASF bit did not get reset after acknowledged

•Timestamp Counter is not counting

•%s Timer is not working

•Cannot clear bit %s in %cX CPU event register

•Invalid "EEPROM_FILENAME" file size, expected %d but only can read %d bytes

•Invalid magic value in %s, expected %08x but found %08x

•Invalid manufacture revision, expected %c but found %c

•Invalid Boot Code revision, expected %d.%d but found %d.%d

•Cannot write to EEPROM

•Cannot read from EEPROM

•Invalid Checksum

•Invalid Magic Value

•Invalid MAC address, expected %02X-%02X-%02X-%02X-%02X-%02X

•Slot error, expected an UUT to be found at location %02X:%02X:00

•Adjacent memory has been corrupted while testing block 0x%08x-0x%08x

•Got 0x%08x @ address 0x%08x. Expected 0x%08x

•*1 Internal Use. Program will not generate this error.

HP NC-Series Intel adapter diagnostics

1.Boot to DOS or the EFI shell.

2.From the DOS prompt navigate to the \APPS\DIAGS\N100X directory.

Diagnostics 60