HP 441877-00F manual Diagnostics

Page 59

•Test aborted by user

•Tx DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x

•Rx DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x

•Tx DMA failed

•Rx DMA failed

•Data error, got 0x%08X at 0x%08X, expected 0x%08X

•Second read error, got 0x%08X at 0x%08X, expected 0x%08X

•Failed writing EEPROM at 0x%04X

•Failed reading EEPROM at 0x%04X

•EEPROM data error, got 0x08X at 0x04X, expected 0x%08X

•Cannot open file %s

•Invalid CPU image file %s

•Invalid CPU image size %d

•Cannot allocate memory

•Cannot reset CPU

•Cannot release CPU

•CPU test failed

•Invalid Test Address Range

•Valid adapter address is 0x%08x-0x%08x and exclude 0x%08x-0x%08x

•DMA:Got 0x%08x @ 0x%08x. Expected 0x%08x

•Unsupported PhyId %04X:%04X

•Too many registers specified in the file, max is %d

•Cannot write to VPD memory

•VPD data error, got %08X @ 0x04X, expected %08X

•No good link! Check Loopback plug

•Cannot TX Packet!

•Requested to Tx %d. Only %d is transmitted

•Expected %d packets. Only %d good packets are received

•%d unknown packets have been received

•%d bad packets have been received

•%c%d is an invalid Test

•EEPROM checksum error

•Error in reading WOL/PXE

•Error in writing WOL/PXE

•No external memory detected

•DMA buffer %04X is large, size must be less than %04X

Diagnostics 59

Image 59

Contents HP ProLiant Network Adapter Software and Configuration Guide Audience assumptions Contents Technical support Supported adapters and operating systems OverviewOverview Adapter driver folders in HP SoftPaq Adapter driver and software informationDocumentation in the HP SoftPaq Downloading files InstallationInstalling network drivers new installations Uninstall HP NC-Series NetXen 10GbE driversWindows 2008 drivers Adapter support on WindowsWindows 2000 drivers Windows 2008 x64 driversWindows 2003 drivers Windows 2003 x64 driversAdapter support on NetWare Adapter support on LinuxParameter Options Description Jumbo = # Warning # Bind IPX Q571ESP NET=477A35BD Syntax SPURIOUS=n Where n = 0 or Balanceinterval Probeburstsize Smpmode Firmware upgrade utility HP NC-Series NetXen Online Firmware Upgrade Utility ROM HP NC-Series 10GbE Adapters Adapter configurationsProperty Parameter Configuring multiple NC510x PCIe 10 GbE adapters Boot options Configuring multiple ports on 10GbE adaptersAdapter configurations HP NC-Series Broadcom adapters TroubleshootingHP NC-Series Broadcom adapter properties Adapter configurations HP NC-Series Broadcom and Multifunction adapter properties Adapter configurations None. Disables checksum offloading HP NC-Series Intel adapter properties HP NC-Series Intel AdaptersAdapter configurations Adapter configurations HP NC-Series Intel adapter properties Adapter configurations Adapter configurations Boot Agent Network Boot PXE Preboot Configuration Possible values Description Settings Ibautil -option Parameter Description Ibautil -ALL -WOLDISABLE Adapter configurations Adapter configurations Adapter configurations NC31xx Fast Ethernet adapter properties HP NC-Series 31xx Fast Ethernet AdaptersAdapter configurations HP NC-Series NetXen 10GbE diagnostics DiagnosticsHP NC-Series Broadcom Multifunction adapter diagnostics Diagnostics Diagnostics HP NC-Series Broadcom adapter diagnostics Page Diagnostics Diagnostics HP NC-Series Intel adapter diagnostics Diagnostics Diagnostics HP contact information Free automated customer support servicesTechnical support Before you contact HPHP FTP Server Acronyms and abbreviations Undi Index