HP 441877-00F manual Diagnostics

Page 54

This tests the external link connection. For the fiber medium, this is simply another external loopback test. For the copper medium, this is not applicable.

Group B: Memory tests

Various patterns (0x55aa55aa, 0xaa55aa55, & address) are used to test each of the memory blocks.

•B1. TXP scratchpad

•B2. TPAT scratchpad

•B3. RXP scratchpad

•B4. COM scratchpad

•B5. CP scratchpad

•B6. MCP scratchpad

•B7. TAS header buffer

•B8. TAS payload buffer

•B9. RBUF via GRC

•B10. RBUF via indirect access

•B11. RBUF Cluster list

•B12. TSCH list

•B13. CSCH List

•B14. RV2P scratchpads

•B15. TBDC memory

•B16. RBDC memory

•B17. CTX page table

•B18. CTX memory

Group C: Block tests

•C1. CPU logic and DMA interface tests

The tests check the basic logic functionalities of each of the on-chip CPUs. The tests also cover the DMA interface exposed to the CPUs. These tests require the presence of a test firmware file inside the “diagfw” directory.

•C2. RBUF allocation test

This tests the Rx buffer allocation interface.

•C3. CAM access test

This tests read, write, add, modify, and cache hit functionalities of the associative memory.

•C4. TPAT cracker test

This tests the packet cracking logic block as well as the checksum/CRC offload logic. This test requires the presence of a test firmware file inside the “diagfw” directory.

•C5. FIO register test

This is another register test dedicated for register interface only exposed to the internal CPUs. This test requires the presence of the test firmware files in the “diagfw” directory.

Diagnostics 54

Image 54

Contents HP ProLiant Network Adapter Software and Configuration Guide Audience assumptions Contents Technical support Overview Supported adapters and operating systemsOverview Adapter driver and software information Adapter driver folders in HP SoftPaqDocumentation in the HP SoftPaq Uninstall HP NC-Series NetXen 10GbE drivers InstallationInstalling network drivers new installations Downloading filesAdapter support on Windows Windows 2008 driversWindows 2003 x64 drivers Windows 2008 x64 driversWindows 2003 drivers Windows 2000 driversAdapter support on Linux Adapter support on NetWareParameter Options Description Jumbo = # Warning # Bind IPX Q571ESP NET=477A35BD Syntax SPURIOUS=n Where n = 0 or Balanceinterval Probeburstsize Smpmode Firmware upgrade utility HP NC-Series NetXen Online Firmware Upgrade Utility ROM Adapter configurations HP NC-Series 10GbE AdaptersProperty Parameter Configuring multiple NC510x PCIe 10 GbE adapters Configuring multiple ports on 10GbE adapters Boot optionsAdapter configurations Troubleshooting HP NC-Series Broadcom adaptersHP NC-Series Broadcom adapter properties Adapter configurations HP NC-Series Broadcom and Multifunction adapter properties Adapter configurations None. Disables checksum offloading HP NC-Series Intel Adapters HP NC-Series Intel adapter propertiesAdapter configurations Adapter configurations HP NC-Series Intel adapter properties Adapter configurations Adapter configurations Boot Agent Network Boot PXE Preboot Configuration Possible values Description Settings Ibautil -option Parameter Description Ibautil -ALL -WOLDISABLE Adapter configurations Adapter configurations Adapter configurations HP NC-Series 31xx Fast Ethernet Adapters NC31xx Fast Ethernet adapter propertiesAdapter configurations Diagnostics HP NC-Series NetXen 10GbE diagnosticsHP NC-Series Broadcom Multifunction adapter diagnostics Diagnostics Diagnostics HP NC-Series Broadcom adapter diagnostics Page Diagnostics Diagnostics HP NC-Series Intel adapter diagnostics Diagnostics Diagnostics Before you contact HP Free automated customer support servicesTechnical support HP contact informationHP FTP Server Acronyms and abbreviations Undi Index