HP d155xi, d135xi, d145 Print-side down. Do not insert labels one sheet at a time, Photo paper

		hp officejet d series
paper	tips
Labels	•	Always use letter-size or A4-size label sheets designed for use with
(works only with		HP inkjet products (like Avery Inkjet Labels), and make sure that the
printing)		labels are not over two years old.
	•	Fan the stack of labels to make sure none of the pages are sticking
		together.
	•	Place a stack of label sheets on top of standard paper in the main tray,
		print-side down. Do not insert labels one sheet at a time.
4” x 6” Photo paper	Insert the photo paper with the print-side down into the main tray until it
(works only with	stops. Place the long edge of the photo paper against the right side of the
printing)	main tray, slide the paper-width guide up against the long edge of the
	photo paper, and slide the paper-length guide in until it stops. If the photo
	paper you are using has perforated tabs, load the photo paper so that the
	tabs are closest to you.
Continuous (banner)	Continuous banner paper is also known as computer or z-fold paper.
paper	•	Before loading banner paper, remove all other paper from the main
(works only with		tray, then raise the output tray until it catches in the raised position.
printing)

Raise the output tray until it stays in the raised position.

Insert first edge of paper into the main tray.

•If you use non-HP banner paper, use 20-lb. paper and fan the paper before loading it.

•Verify that the stack of banner paper contains at least five pages in the stack.

•Carefully tear off the perforated edge strips from both sides of the paper stack, if any, and unfold and refold the paper to make sure the pages do not stick together.

•Put the paper in the main tray so that the unattached edge is at the top of the stack. Insert the first edge into the main tray until it stops, as shown in the illustration above.

tips for loading other types of paper in the main tray 21