hp officejet d series
choose the paper tray and set the paper type
If you want to use a different type of paper, such as photo paper, transparency film, banner paper, or envelopes, simply load that paper in the main tray. You should then change the paper type settings to ensure the best print quality.
If you have installed HP
Caution! You must also have the
You can change copy settings from the front panel or from the HP Director. When you change settings using the front panel, the copy settings are reset two minutes after the unit completes the copy.
HP recommends paper type settings according to the type of paper you’re using. For more information, see recommended
1Press Tray Select/Paper Type.
If you have both paper trays, press Tray Select/Paper Type until the desired paper tray is selected, indicated by the dot on the left.
2When copying from the main tray, press until the appropriate paper type appears.
3Press Enter to choose the displayed paper type.
set the paper size
For more information, see adjust paper settings for printing in the onscreen User’s Guide.
1Press Menu.
2Press 1, then press 2.
This selects Copy Setup, then selects Paper Size.
3 Press until the desired size appears, then press Enter to select it.
learn more
See the load section in the onscreen User’s Guide to learn more about the following:
•Recommended
•Recommended
22 | load originals and load paper |