Raypak 1334001 operating instructions Scope

Page 49

LIMITED PARTS WARRANTY

RAYTHERM™ COMMERCIAL HEATERS

TYPES H & WH

MODELS 0133 TO 4001

SCOPE:

Raypak, Inc. ("Raypak") warrants to the original owner that all parts of this heater which are actually manufactured by Raypak will be free from failure under normal use and service for the specified warranty periods and subject to the conditions set forth in this Warranty. Labor charges and other costs for parts removal or reinstallation, shipping and transportation are not covered by this Warranty but are the owner's responsibility.

ANY PART MANUFACTURED BY RAYPAK:

One (1) year warranty from date of heater installation, or eighteen (18) months from date of factory shipment based on Raypak's records, whichever comes first.

SATISFACTORY PROOF OF INSTALLATION DATE, SUCH AS INSTALLER INVOICE, IS REQUIRED. THIS WARRANTY WILL BE VOID IF THE HEATER RATING PLATE IS ALTERED OR REMOVED.

HEAT EXCHANGER WARRANTY:

Domestic Hot Water

Five (5) years from date of heater installation. Includes copper heat exchanger with bronze and cast iron waterways.

Ten (10) years from date of heater installation. Includes only cupro-nickel heat exchanger with bronze or cast iron waterways. Space Heating (Closed Loop System)

Ten (10) years from date of heater installation. Includes both cupro-nickel and copper heat exchanger with bronze or cast iron waterways.

Thermal Shock Warranty

Twenty (20) years from date of heater installation against "Thermal Shock" (excluded, however, if caused by heater operation at large changes exceeding 150°F between the water temperature at intake and heater outlet temperature, or operating at heater temperatures exceeding 230°F).

ADDITIONAL WARRANTY EXCLUSIONS:

This warranty does not cover failures or malfunctions resulting from:

1.Failure to properly install, operate or maintain the heater in accordance with our printed instructions provided;

2.Abuse, alteration, accident, fire, flood and the like;

3.Sediment or lime build-up, freezing, or other conditions causing inadequate water circulation;

4.High velocity flow exceeding heater design rates;

5.Failure of connected systems devices, such as pump or controller;

6.Use of non-factory authorized accessories or other components in conjunction with the heater system;

7.Failure to eliminate air from, or replenish water in, the connected water system;

8.Chemical contamination of combustion air or use of chemical additives to water.

PARTS REPLACEMENT:

Under this Warranty, Raypak will furnish a replacement for any failed part. The failed part must first be returned to Raypak if requested, with transportation charges prepaid, and all applicable warranty conditions satisfied. The replacement part will

be warranted for only the unexpired portion of the original warranty. Raypak makes no warranty whatsoever on parts manufactured by others, but Raypak will apply any such warranty as may be provided by the parts manufacturers.

TO MAKE WARRANTY CLAIM:

Promptly notify the original installer, supplying the model and serial numbers of the unit, date of installation and description of the problem. The installer must then notify a Raypak distributor for instructions regarding the claim. If either is not available, contact Service Manager, Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA or call (805) 278-5300. In all cases proper authorization must first be received from Raypak before replacement of any part.

EXCLUSIVE WARRANTY - LIMITATION OF LIABILITY:

This is the only warranty given by Raypak. No one is authorized to make any other warranties on Raypak's behalf. THIS WARRANTY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. RAYPAK'S SOLE LIABILITY AND THE SOLE REMEDY AGAINST RAYPAK WITH RESPECT TO DEFECTIVE PARTS SHALL BE AS PROVIDED IN THIS WARRANTY. IT IS AGREED THAT RAYPAK SHALL HAVE NO LIABILITY, WHETHER UNDER THIS WARRANTY, OR IN CONTRACT, TORT, NEGLIGENCE OR OTHERWISE, FOR ANY SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGE, INCLUDING DAMAGE FROM WATER LEAKAGE. Some states do not allow limitations on how long an implied warranty lasts, or for the exclusion of incidental or consequential damages. So the above limitation or exclusion may not apply to you.

This Limited Warranty gives you specific legal rights. You may also have other rights which may vary from state to state. We suggest that you complete the information below and retain this certificate in the event warranty service is needed. Reasonable proof of the effective date of the warranty (date of installation) must be presented, otherwise, the effective date will be based on the date of manufacture plus thirty (30) days.

_____________________________________________________

______________________________________________

Name of Owner

Name of Dealer

_____________________________________________________

______________________________________________

Address

Address

_____________________________________________________

______________________________________________

_____________________________________________________

______________________________________________

Model No.

Serial No.

Date of Installation:_____________________________________

Date of Initial Operation: ___________________________

RAYPAK, INC. • 2151 Eastman Avenue • Oxnard, CA 93030 • (805) 278-5300 • Fax (800) 872-9725 • www.raypak.com

49

Image 49
Contents Raytherm Hot Water Supply Heaters Page Contents If Propane is Present or Suspected Temperature limiting valves are available, see manual General SafetyTemperature Time to Produce Serious Burn Feel water before bathing or show- eringReceiving Equipment Time/Temperature Relationships in ScaldsModel Identification Installation Clearances Installation Clearances All Dimensions are in InchesModel Part Number Model Specifications and DimensionsModels 0182-0400 MBH ModelsMBH GPH High Wind Conditions Outdoor Units Only Outdoor Water HeatersVent Terminal Outdoor Stackless Top Installation Outdoor InstallationsVenting Models 0181-0401Indoor Installations Indoor Top Installation Models 0181-0401 Vent Terminal/Indoor Stack Installation Vent Piping Vent PipingModels 0133 Through 0180 Where Required Vent Damper InstallationLocation MountingVent Damper InstallationGeneral PlumbingGas Supply Connections Venting of Diaphragm Gas Components Gas Pressure RegulatorMaximum and Minimum Flow Rates Flow RatesSoft Medium Hard Piping-Domestic Hot Water Supply HeatersPiping Diagram-Type WH Unitemp 80 System Controls-General Pump Time DelayRelief Valve Electronic IgnitionLimit Controls Flow SwitchHigh Limit High and Low Gas Pressure Switches Optional 100% Pilot SafetyElectrical Connections Low Water Cut-Off OptionalLocation of Controls 0824 Before Start-Up START-UP ProceduresGeneral Initial Start-Up Pump and MotorFor Your Safety Read Before Operating Burners Inspection ProceduresControls After Start-UpStart-Up Procedures S8610b Ignition Module Inspection ProceduresOperation Should be checked monthly. Takes approximately 15 minutesHigh Gas Pressure Switch Burner AdjustmentVisual Inspection ElectricalPilot Removal Main burner And Orifice RemovalCombustion Fan Removal Intermittent Pilot System Honeywell S8600 Electrical-Electronic Ignition IIDMechanical Mechanical Problem Possible Cause Corrective ActionWiring Diagram-W2/WH2 Wiring DiagramsWiring Diagram-WH1 0181/0261 Wiring Diagram-WH1 0331/0401 Wiring Diagram-WH1 Wiring Diagram-WH1 Wiring Diagram-WH1 Wiring Diagram-WH1 Troubleshooting-Pumps Service Maintenance ProceduresTube Cleaning Combination Flame SENSOR/ Igniter and Pilot Burner Heat Exchanger Re-Assembly Pilot Removal and CleaningHigh Limit or Tankstat Removal Heat Exchanger RemovalControl Well Replacement Replacement PartsTube Replacement Cleaning Flue Gas PassagewaysScope Page