Heath Zenith SL-6107 manual Adjustment Photo Sensitivity, Minutes, Any Light Level, Dark, Seconds

ADJUSTMENT

PHOTO SENSITIVITY

ON

AUTO

OFF

20 Minutes Any Light Level Dark

++

Press in with screwdriver. Swing out cover to remove.

T I M EL I G H T

5 Seconds

The sensor can be prevented from turning on lights when there is already enough light in the room. Use a small screwdriver to set the light level using this diagram as a guide. In the fully clockwise position, the sensor turns on lights even in full daylight. In the fully counter-clockwise position, the sensor only turns on lights when the surrounding light level is very low.

❐With the switch in the AUTO position and the light at the desired level for the lights to turn on, put the LIGHT control to the minimum dark (fully counter-clockwise) position. Wait for the lights to turn off.

❐Move your hand in front of the sensor. While moving your hand in front of the sensor, slowly turn the LIGHT adjustment clock- wise until the lights controlled by the sensor come on.

595-4514-13-9-