Heath Zenith SL-6107 manual Special Installations, Single Switch Installation

SPECIAL INSTALLATIONS

For single switch

installations, con- nect the wall switch as shown here.

SINGLE SWITCH INSTALLATION

BLACK

BLACK BROWN

FROM		RED	BLACK
POWER	OFF AUTO ON
SOURCE

SL-6107

WHITE WHITE

If you want to have mo- tion sensors at both 3-way switches, con- nect them as shown below. The minimum wattage may increase to 100 W for fluores- cent and 50 W for in- candescent lighting.

EXISTING LIGHT SWITCH CONFIGURATION

FROM	WHITE	WHITE	WHITE
POWER	BLACK	*COMMON	*COMMON
SOURCE
		RED
		(In Wall)
		BLACK	BLACK

			2 SWITCH INSTALLATION
FROM	WHITE			WHITE		WHITE
POWER
SOURCE
BROWN					BROWN
			BLACK			BLACK
RED				BLACK
	OFF	AUTO	ON		OFF AUTO	ON
(From 6107)					RED	BLACK
			SL-6107	(From 6107)		SL-6107
			RED (In Wall)

*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different loca- tion, depending on the brand of your switch.

RED is used to represent the second wire between two standard three-way switches. This may not be the color used in all installation. If you are not sure about your wiring, call an electrician for installation help. There is also a RED wire on the SL-6107 switch. Check the instructions above closely and do not confuse the two.

- - 595-4514-14