Final Assembly
Install the Logs
The log set consists of seven pieces as follows:
• | rear | • | right hand top |
• | left hand middle | • | left hand front |
• | right hand middle | • | right hand front |
•center top
1.Remove the two retaining screws that secure the combustion chamber glass panel.
2.Rotate and lift the combustion chamber glass clear of the combustion chamber and place in a safe location.
retaining screws
rear
Step 3
locating pins
left hand middle
right hand middle
J
Steps 4 & 5
3.Seat the rear log into the combustion chamber onto its location pins.
4.Seat the left hand middle log onto its location pins.
5.Seat the right hand middle log onto its location pins.
6.Seat the center top log onto the location pins.
7.Seat the right hand top log onto the location pins.
8.Place the left hand front log and the right hand front log on the pins.
9.Install the glass panel with two retainer screws at the top of the panel.
locating pins
center top
right hand top
Steps 6 & 7
locating pins
left hand front
right hand front
Step 8
Rinnai Corporation | 27 |