Stovax 8455 manual Installation Instructions, Site Requirements, 1A VFC Radiant 1B VFC Convector

Page 11

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

1A VFC Radiant

1B VFC Convector

4.4The appliance must be firmly fixed to the hearth. Fasteners are provided for this purpose.

4.5Ensure that no naked flame or incandescent part of the fire bed projects beyond the vertical plane of the fireplace opening.

4.6The appliance must not be installed in any room that contains a bath or shower.

4.7Ensure clearances to combustible materials - see Diagram 2.

Image 11

Contents VFC Radiant & Convector Fire Range For use in GB, IE Great Britain and EireInstructions for Use Installation and Servicing With upgradeable control valveServicing Instructions CONTENTSuser instructions instaLlation Instructions IMPORTaNT NOTICE APPLIANCE COMMISSIONING CHECKLISTDEALER AND INSTALLER INFORMATION 3.TURNING THE FIRE OFF USER INSTRUCTIONS1.general 2.LIGHTING THE FIRE7.ARRANGEMENT OF FUEL BED COMPONENTS 6.CLEANING THE FIREUSER INSTRUCTIONS 5.UPGRADING YOUR FIRE18” COAL LAYOUT USER INSTRUCTIONS16” AND REDUCED DRAUGHT COAL LAYOUT AR1122 USER INSTRUCTIONS22” COAL LAYOUT AR11219. THE FLAME FAILURE DEVICE 13. INSTALLATION DETAILSUSER INSTRUCTIONS 8. OXYGEN DEPLETION SENSORVFC CONVECTOR TECHNICAL SPECIFICATIONtHESE INSTRUCTIONS COVER THE FOLLOWING MODELS VFC RADIANTSITE REQUIREMENTS INSTALLATION INSTRUCTIONS1A VFC Radiant 1B VFC Convector INSTALLATION INSTRUCTIONSSITE REQUIREMENTS 2.SAFETY PRECAUTIONS INSTALLATIONINSTALLATION INSTRUCTIONS 1.CONTROL UPGRADE5.INSTALLATION - CONVECTOR FIRES INSTALLATION INSTRUCTIONSINSTALLATION 6.ARRANGEMENT OF FUELBED COMPONENTS INSTALLATION INSTRUCTIONSINSTALLATION ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICSNOTE CERAMIC PARTS ARE FRAGILE INSTALLATION INSTRUCTIONSINSTALLATION 16” AND REDUCED DRAUGHT COAL LAYOUT18” COAL LAYOUT INSTALLATION INSTRUCTIONSINSTALLATION 6.9Curved fronts Holyrood- Place 6 large coals onto the front coal moulding ensuring that they rest against the front. Place 2 small coals onto the front coal, 1 at each end. See Diagram7.LIGHTING INSTALLATION INSTRUCTIONSINSTALLATION 1.COMMISSIONING COMMISSIONINGINSTALLATION INSTRUCTIONS SERVICING REQUIREMENTS SERVICING INSTRUCTIONSIGNITION FUNCTIONAL CHECK NO SPARK FAULT FINDINGSee “NO SPARK” chart IGNITION FUNCTIONAL CHECK PILOT WILL NOT LIGHT3.PIEZO REPLACING PARTSSERVICING INSTRUCTIONS 2.IGNITION LEAD6.GAS VALVE REPLACING PARTSSERVICING INSTRUCTIONS 5. ODS PILOT UNIT8.MAIN INJECTOR INSTALLATION INSTRUCTIONSREPLACING PARTS 7.MAG UNITNatural Gas Parts SPARES PARTS LISTMANUAL FIRES SERVICE RECORDS