Omega Speaker Systems FPU5-MT-220, FPU5-MT-110 manual Total Volume

Page 37

5Operating the Pump Motor in the STOPPED Display Mode

RPM

Display shows

xxx rpm

ACTION

Displays current

RPM setting

FLOW

RATE

Display shows

xxx mL/min

ACTION

Displays current

FLOW RATE setting

TIME

Display shows

xx:xx:xx

ACTION

Displays current

TIME setting

The flashing group (SECONDS, MINUTES, or HOURS) is the one that will scroll when the UP or DOWN ARROW key is pressed. Pressing the TIME key again will select a different group.

TOTAL

VOLUME

Display shows

xxx mL or xxx Liters

ACTION

Displays current

TOTAL VOLUME

setting

5-10

Using the UP ARROW key () will cause the RPM setting to scroll up to 600 rpm then roll over to 10 rpm.

OR

Using the DOWN ARROW key () will cause the RPM setting to scroll down to 10 rpm then roll over to 600 rpm.

Using the UP ARROW key () will cause the FLOW RATE value to scroll up to the maximum FLOW RATE determined by TUBE ID then scrolls over to the minimum FLOW RATE.

OR

Using the DOWN ARROW key () will cause the FLOW RATE value to scroll

down to the minimum FLOW RATE determined by TUBE ID then scrolls over to the maximum FLOW RATE.

Using the UP ARROW key () will cause the flashing TIME setting to scroll up to maximum then roll over to “0”. The maximum time is 12 hours, 59 minutes and 59 seconds (12:59:59).

OR

Using the DOWN ARROW key () will cause the flashing TIME setting to scroll down to “0” then roll over to the maximum. The maximum time is 12 hours, 59 minutes and 59 seconds (12:59:59).

Using the UP ARROW key () will cause the display to scroll up to a maximum of 10000 liters then over to 1 mL.

OR

Using the DOWN ARROW key () will cause the display to scroll down to 1 mL then roll over to 10000 liters.

Image 37
Contents User’s Guide Servicing North America Unpacking Instructions Table of Peristaltic Pump Motor Peristaltic Pump Motor Chapter Specifications Spare Parts and Accessories 10-1Peristaltic Pump Motor RPM IndexIndex III Introduction FeaturesDescription Introduction Front View Parts of the Pump MotorFront View Description FunctionLeft Side View Left Side ViewRight Side View Right Side ViewMembrane Keypad Detail Membrane Keypad and DisplayFlow Rate key Membrane Keypad Details cont’dUP and Down Arrow Keys Scrolling Limits Rear ViewRear View Language Button Rear View cont’dParts of the Pump Motor Getting Started Pump Motor Mounting Configurations Number of Pumps onAttaching the Pump IntroductionRefer to Figures 3-1 through Attaching a Single Pump Directly to the MotorPlacing the Second Pump on Top of the First Pump Stacking Two Pumps on One Side of the MotorTubing Life Selecting TubingLoading the Tubing See .2 to set the pumping direction Getting Started Using the ON/OFF Switch Turning on the PowerStopped Display Mode Introduction to the Two Display ModesStopped vs. Running Display Modes Running Display ModeOperating the Pump Motor Stopped Display ModeDisplaying Pump Messages in Five Different Languages Régler LA QTÉ English French Spanish German ItalianDefining the Direction of Pumping Left Pump Right Pump Selecting the Tubing Inner DiameterTube Inner Diameters English Metric Calibrating the Tubing Priming the TubingOperating the Pump Motor in the Stopped Display Mode Tips for Optimum Calibration Accuracy Preparing for Pumping in a Specific Mode Measuring the Temperature of a FluidTotal Volume RPM Mode Running Display ModePumping in the RPM Mode Shows the range of the RPM numbers you can work with RPM Mode Cont’d Pumping in the Flow Rate Mode Flow Rate ModeShows the ranges allowed for the various tubing sizes Flow Rate Ranges cont’d Display Xxx mL/min Flow Rate Mode Flow Rate Mode Pumping in the Time Mode Time ModeTime Range Display Xxxxxx Time Mode Time Mode Block Diagram Pumping in the Total Volume Mode Total Volume ModeTotal Volume Range Pumping in the Total Volume ModeOperating the Pump Motor in the Running Display Mode Total Volume Mode Cont’d Other Pumping Options Preventing Tubing from Moving During Pump OperationAuxiliary Out Remote Monitor Auxiliary In Remote Start/Stop 500Ω LEDDisplay Error Messages Troubleshooting GuideError Message Problem SolutionRunning Display Mode and try to select the command again Error MessageLocked Rotor? Overcurrent Press the Total Volume key Short Circuit? Error Message Stopped Display Mode and refer to Section Other Pumping ProblemsProblem Solution Another pump, if necessary Troubleshooting Guide Maintenance Design SolutionTechnical Details Theory of OperationTechnical Details Calibration Accuracy SpecificationsMotor Average Flow RatesTubing Materials SpeedAverage Tubing Life ⁄32 300 ⁄16 250 100 ML Per Revolution Specifications Accessories Spare Parts and AccessoriesSpare Parts Part Number DescriptionAccessories cont’d Peristatic Pump 10-4 WARRANTY/DISCLAIMER