Operating the Pump Motor in the RUNNING Display Mode | 6 |
|
|
TIME
Display shows
xx:xx:xx
ACTION
Displays current
TIME setting
Display shows |
xx:xx:xx |
ACTION |
TIME setting scrolls up |
Display shows
xx:xx:xx
ACTION
TIME setting scrolls down
7.To change the SECONDS setting, press the TIME key repeatedly, until the SECONDS flash. Use the UP and DOWN ARROW keys to enter the SECONDS setting you desire.
8.Once the display shows the TIME setting you desire, press the START/STOP key. As the fluid begins to dispense, the
START
STOP
Display
xx:xx:xx
ACTION
Pump(s) starts;
press again pump(s)
stops
NOTE
In the TIME Mode, the pump stops running after it counts up to the TIME setting.
To stop pumping before that time, press the START/STOP key. The pump stops running, and the display returns to the STOPPED Display Mode.
Table