Samsung DVD-HD745/XEG, DVD-HD745/XEL manual Setting Up the Display Options

Surround Sound Speaker Setup Setting Up the Display Options

Setting Up the Display Options

The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small).

Select the size of the speakers to be connected.

• Front (FL, FR)

-Large: Normally select this.

-Small: When the sound distorts or the surround sound effects are difficult to hear, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the speaker from the subwoofer.

• Center

-None: If you do not connect a center speaker, select this.

-Large: Normally select this.

-Small: When the sound distorts, select this. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the center speaker from other speakers.

•Surround (SL, SR)

-None: If you do not connect a center speaker, select this.

-Large (Rear/Side): Normally select either of these according to the rear speaker’s position.

-Small (Rear/Side): When the sound distorts or the surround sound effects are difficult to hear, select either of these according to the rear speaker’s position. This activates the Dolby Digital bass redirection circuitry and outputs the bass frequencies of the rear speaker from other speakers.

Setting up TEST

1.With the unit in Stop mode, press the MENU button.

2.Select Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

3.Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4.Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

DVI Output : Mode B

TV ASPECT

4:3 Letter Box

4:3 Pan Scan

Still Mode

These options will help prevent picture shake in still mode and display small text clearer.

1.Auto : When selecting Auto, Field/Frame mode will be automatically converted.

2.Field : Select this feature when the screen shakes in the Auto mode.

3.Frame : Select this feature when you want to see small letters more clearly in the Auto mode.

Screen Messages

Use to turn on-screen messages On or Off.

Black Level

Adjusts the brightness of the screen.(On/Off)

TV System

1.NTSC Disc : In case of using NTSC disc

•If your TV system only has PAL-Video input, you must choose “PAL”. When you choose “PAL”, Interlace output format is PAL 60 Hz output.

•If your TV system only has NTSC, input you must choose “NTSC Output”.

•If you set up the NTSC TV system, DVI output frame rate is 60 Hz.

2.PAL Disc : In case of using PAL disc

•If your TV system only has NTSC-Video input, you must choose “NTSC Output”.

•If your TV system only has PAL input, you must choose “PAL Output”.

•If you set up the PAL TV system, DVI output frame rate is 50 Hz.

Video Output

Select Video Output.

1.S-Video : Select when you want to use Video and S-Video Out.

2.Component (I-SCAN) : Select when you want to use Video and Component 525i(Interlace) Out

3.Component (P-SCAN) & DVI : Select when you want to use Component 525p(Progressive) Out or DVI.

*If you press the VIDEO SEL. button, Video output

mode is changed in regular sequence in no disc mode. (S-Video ➝ I-SCAN ➝ P-SCAN & DVI ➝ SCART RGB ➝ SCART VIDEO)

4.SCART Output : Select when you want to use Scart Out.

•RGB : Select when you want to use SCART RGB Out.

•Video : Select when you want to use SCART Video Out.

*If the Yes/No selection in the Display Setup sub Menu is not made within 10 seconds, the screen returns to the previous menu.

DVI Output : Mode B

The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.

FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝ FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)

Note

How to make the SETUP menu disappear or return to menu screen during set up. Press RETURN or LEFT button.

•The subwoofer test output signal is lower than the other speakers.

•The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.

•If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically.

16:9 Wide

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1.4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2.4:3 Pan Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3.16:9 Wide : You can view the full 16:9 picture on your widescreen TV.

DVI Output : Mode B

Important Note

•In case of differ from your TV and TV system setting value video output may be blocked.

•You have to setup TV system correctly.

•Refer to your TV user's manual.

•If you use NTSC disc at PAL TV system, motion picture may be distorted.

•If you use PAL disc at NTSC TV system, motion picture may be distorted.

DVI Output

You can use this function to DVI output format.

•This function corrects a biased TV screen to secure a normal view.

•If DVI Output is set incorrectly, the screen can be biased.

Important Note

•Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.

•If Video Output is set incorrectly, the screen can be blocked. (See page 40)

ENG-34 ENG-35