Samsung SHR-3040P manual Checking the Installation Environment

Page 11

installation

Please be noticed with the followings before you use the product.

•Do not use the product outdoor.

•Do not spill water or liquid in the connection part of the product.

•Do not impose the system to excessive shock or force.

•Do not pull out the power plug forcefully.

•Do not disassemble the product on your own.

•Do not exceed the rated input/output range.

•Use a certiﬁ ed power cord only.

•For the product with an input ground, use a grounded power plug.

CHECKING THE INSTALLATION ENVIRONMENT

 INSTALLATION

•Samsung Digital video recorder (“DVR” hereinafter) is a state- of-art security device, and contains mass storage hard disk(s) and critical circuits inside.

•When the temperature rises inside the product, the product may breakdown and the product life be shortened. please pay attention to the following recommendations before installation.

Temperature	One Year: 24HR X 365 DAY =8,760 HR
Unit: ºC

Life (Unit: HOURS)

[Figure 1]

The followings are the recommendations when Samsung DVR is installed on a rack.

1. Please ensure that the rack inside is not sealed.

2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.

3. If the DVR or other devices on a rack is to be stacked as in the picture, provide a suitable space or install a ventilating opening for air circulation.

4. For natural air convection, place the inlet at the bottom of the rack and the outlet on top.

5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for air circulation. (Please ﬁ t a ﬁ lter at the inlet to screen dust or foreign substances.)

6. Please maintain the temperature inside the rack or surrounding areas between 0°C ~ 40°C (32°F ~ 104°F) as shown in the fgure 1.

J  The rack installation is available only in shelf type.

[Figure 2]

English _11

Image 11

Contents Channel DVR 2X Zoom KEY Features Overview Important Safety InstructionsStandards Approvals Before Start BatteryDVR Remote Control/Battery AAAX2Installation CD User’s Manual What’s IncludedContents Appearance & Dimension What is Web Viewer?Client Setup Remote SetupFront Panel Rear Panel Audio Remote Control AT a Glance The rack installation is available only in shelf type Checking the Installation EnvironmentInstalling HDD Connecting to RS-485, alarm Connecting to a Different DeviceConnecting to video, audio, and monitor USB Connection Network ConnectionGetting Started LoginConnect the power cable of the DVR to the wall outlet LiveFull Live Screen ConﬁgurationHDD Auto Zoom View the Launcher MenuSplit Screen Single Screen of CH Mode SwitchPIP Display CH4 CH1 ZoomAuto Sequence FreezePTZ RecordSearch menu appears SearchPercent Search Date/Time SearchEvent Search PlayEvent Search Event Monitoring To set the event updateSpecify a time in Main Menu Configuration Interval Setup Event UpdateEvent Monitoring on the Spot Monitor Spot Setup Setup Using the MenuUsing the mouse Using the buttons on the remote control or the front panelVGA Setup Display SetupVGA Setup Display SetupOSD Setup Screen Display SetupQuality Select the quality from Highest, High and Normal Record SetupOSD Setup Record SetupSchedule Setup Schedule SetupSETUP, and press OK Schedule Setup screen appearsHDD Management ConfigurationConfiguration HDD ManagementChannel Select a channel to change the title Camera SetupCamera Setup Motion Setup Motion SetupAlarm Setup  By default, all cells are set to disabledAuto sequence interval for each camera channel Interval SetupSetup Alarm SetupDATE/TIME Setup Date/Time SetupPassword Setup Occurs Buzzer SetupUser ID Select a user ID KEY Tone Set the key tone of the buttonExternal Device TCP/IP SetupIP Setup TCP/IP SetupDdns Setup Ddns SetupWhat is DDNS? IP SetupCommand Setup PTZ SetupCommand Setup PTZ SetupSpeed Setup Speed SetupSpecify the Sensitivity Mouse SetupMouse Setup Audio Setup Audio SetupSpot Setup Adjust the I/O volumeEvent Popup Duration Specify the event popup BackupBackup You can backup HDD recording data on a USB storage deviceSize is Larger than Free Space System MessagesFile System is not Supported Firmware Upgrade Firmware UpgradeUpgrade You can upgrade the DVR ﬁ rmware with the latest versionChanging Factory Default Factory DefaultFactory Default You can select a language to your preference Load SetupSelect Load Setup LanguageConnection Network Connection and SettingsSet Dhcp Mode to Manual in Main Menu If you are not using a router for network connectionStatic IP Mode Dynamic IP Dhcp ModeRouter Dhcp IP Address If using a routerUsing DVR Static IP DVR NetworkPort Forwarding of Web Server Port Router Port Forwarding with IP/Port Router WEB Viewer What is WEB VIEWER?Connecting to the WEB Viewer System RequirementsWEB Viewer AT a Glance To register a web site Client SetupWeb Viewer Setup UpdateTo return to the Web Viewer screen, click Close Remote SetupBuzzer Record Schedule You can set the recording quality Refer to Record SETUP.You can set the recording schedule Refer to Schedule SETUP. Record ConﬁgurationPlayer Player at a Glance Edit Tool Image EditRemote Viewer When done, the ‘C WEBBACKUP’ folder will openAudio signal will not be saved with AVI Save DVR You can select Single screen or 4-split modeRemote Viewer at a Glance PTZ Control Only the admin user account can access the Setup menu SetupEvent  Appendix Product SpecificationUSB 20% to 85% RH Ddns20C ~ +60C -4F ~ +140F 258 247 371 Appearance & DimensionTroubleshooting FAQ Audio Setup Correct disposal of batteries in this product