Samsung SHR-3040P manual Changing Factory Default

Page 45

FACTORY DEFAULT

You can restore the settings to the factory default.

Factory Default

1.Press the [MENU] button on the front panel or remote control.

The “DVR LOG-IN” dialog appears.

2.Enter the password and select <ENTER>. The “MAIN MENU” screen appears.

MAIN MENU

DISPLAY SETUP

RECORD

CONFIGURATION

EXTERNAL DEVICE

BACK-UP

FIRMWARE UPGRADE

FACTORY DEFAULT

LANGUAGE

ENGLISH

SHUTDOWN

EXIT

 SETUP

3.Use the up/down (▲▼) button to select <FACTORY DEFAULT>, and press [OK].

The “FACTORY DEFAULT” screen appears.

4.Use the up/down (▲▼) button to move to an item to reset and select <ON>.

5.Select <DEFAULT> in the bottom.

The selected item will be reset to the factory default.

To reset all items, set <ALL> to <ON> and select <DEFAULT>.

FACTORY DEFAULT

ALLOFF

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DISPLAY SETUP

OFF

RECORD SETUP

OFF

SCHEDULE SETUP

OFF

CAMERA SETUP

OFF

CONFIGURATION

OFF

EXTERNAL DEVICE

OFF

CHANGE FACTORY DEFAULT

 

LOAD SETUP

 

SAVE SETUP

 

DEFAULT

ESC

Changing Factory Default

You can customize the factory default settings to your preference.

1. Connect a FAT 32 formatted USB storage device and

 

FACTORY DEFAULT

 

 

select <SAVE SETUP>.

 

ALL

OFF

When done, you will see a message of “LOAD SETUP

 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

 

SUCCESS” on the screen.

 

DISPLAY SETUP

OFF

 

RECORD SETUP

OFF

All current settings of the DVR will be saved to the USB device.

 

 

SCHEDULE SETUP

OFF

It takes 5 to10 seconds, depending on the USB device.

 

CAMERA SETUP

OFF

 

CONFIGURATION

OFF

 

 

 

 

EXTERNAL DEVICE

OFF

 

 

CHANGE FACTORY DEFAULT

 

 

 

 

LOAD SETUP

 

 

 

 

SAVE SETUP

 

 

 

 

DEFAULT

ESC

 

 

 

 

 

2.When done, select <CHANGE FACTORY DEFAULT>. You will see a message of “CHANGE FACTORY DEFAULT SUCCESS” on the screen.

The factory default is changed successfully.

It takes 5 to10 seconds, depending on the USB device.

FACTORY DEFAULT

ALLOFF

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DISPLAY SETUP

OFF

RECORD SETUP

OFF

SCHEDULE SETUP

OFF

CAMERA SETUP

OFF

CONFIGURATION

OFF

EXTERNAL DEVICE

OFF

CHANGE FACTORY DEFAULT

 

LOAD SETUP

 

SAVE SETUP

 

DEFAULT

ESC

English _45

Image 45
Contents Channel DVR 2X Zoom KEY FeaturesImportant Safety Instructions Standards Approvals Overview Before Start BatteryInstallation CD User’s Manual Remote Control/Battery AAAX2What’s Included DVRContents Client Setup What is Web Viewer?Remote Setup Appearance & DimensionFront Panel Rear Panel Audio Remote Control AT a Glance The rack installation is available only in shelf type Checking the Installation EnvironmentInstalling HDD Connecting to a Different Device Connecting to video, audio, and monitorConnecting to RS-485, alarm USB Connection Network ConnectionConnect the power cable of the DVR to the wall outlet LoginLive Getting StartedLive Screen Configuration HDD AutoFull Zoom View the Launcher MenuMode Switch PIP DisplaySplit Screen Single Screen of CH Auto Sequence ZoomFreeze CH4 CH1PTZ RecordPercent Search SearchDate/Time Search Search menu appearsPlay Event SearchEvent Search Specify a time in Main Menu Configuration To set the event updateInterval Setup Event Update Event MonitoringEvent Monitoring on the Spot Monitor Spot SetupUsing the mouse Using the MenuUsing the buttons on the remote control or the front panel  SetupVGA Setup Display SetupDisplay Setup VGA SetupOSD Setup Screen Display SetupOSD Setup Record SetupRecord Setup Quality Select the quality from Highest, High and NormalSETUP, and press OK Schedule SetupSchedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementCamera Setup Camera SetupChannel Select a channel to change the title Alarm Setup Motion Setup By default, all cells are set to disabled Motion SetupSetup Interval SetupAlarm Setup Auto sequence interval for each camera channelDate/Time Setup Password SetupDATE/TIME Setup User ID Select a user ID Buzzer SetupKEY Tone Set the key tone of the button OccursIP Setup TCP/IP SetupTCP/IP Setup External DeviceWhat is DDNS? Ddns SetupIP Setup Ddns SetupCommand Setup PTZ SetupPTZ Setup Command SetupSpeed Setup Speed SetupMouse Setup Mouse SetupSpecify the Sensitivity Spot Setup Audio SetupAdjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupSystem Messages File System is not SupportedSize is Larger than Free Space Upgrade Firmware UpgradeYou can upgrade the DVR fi rmware with the latest version Firmware UpgradeFactory Default Factory DefaultChanging Factory Default Select Load Setup Load SetupLanguage You can select a language to your preferenceConnection Network Connection and SettingsStatic IP Mode If you are not using a router for network connectionDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuUsing DVR Static IP If using a routerDVR Network Router Dhcp IP AddressPort Forwarding of Web Server Port Router Port Forwarding with IP/Port RouterConnecting to the WEB Viewer What is WEB VIEWER?System Requirements  WEB ViewerWEB Viewer AT a Glance Web Viewer Setup Client SetupUpdate To register a web siteRemote Setup BuzzerTo return to the Web Viewer screen, click Close You can set the recording schedule Refer to Schedule SETUP. You can set the recording quality Refer to Record SETUP.Record Configuration Record SchedulePlayer Player at a Glance Edit Tool Image EditWhen done, the ‘C WEBBACKUP’ folder will open Audio signal will not be saved with AVI SaveRemote Viewer Remote Viewer at a Glance You can select Single screen or 4-split modePTZ Control DVR Only the admin user account can access the Setup menu SetupEvent Product Specification USB Appendix Ddns 20C ~ +60C -4F ~ +140F20% to 85% RH 258 247 371 Appearance & DimensionTroubleshooting FAQ Audio Setup Correct disposal of batteries in this product