EVENT MONITORING
This will display a specifi c event such as alarm and event on the screen of each channel. The event will be displayed regardless of the schedule setting.
To set the event update
1.Specify a time in “MAIN MENU > CONFIGURATION >
INTERVAL SETUP > EVENT UPDATE”.
Set the time between 10 and 990 seconds by the 10 seconds.
For more information, refer to “INTERVAL SETUP”. (Page 33)
2.If an event specifi ed in the recording schedule occurs, the event update will be made.
For more information, refer to “SCHEDULE SETUP”. (Page 29)
INTERVAL SETUP
SEQUENCE SCREEN | 01 | SEC |
PIP SCREEN | 01 | SEC |
EVENT UPDATE | 600 | SEC |
OK
DEFAULTESC
LIVE
•A video loss event will be updated only while recording is in process.
•An alarm list will be updated only if the recording schedule has been set to Alarm.
•A motion event will be updated only if the recording schedule has been set to Motion.
•Alarm and motion events will be updated only if the recording schedule has been set to Alarm + Motion.
To update the event list
Ex) If you set the event update interval to 10 seconds, the next event will be updated in at least 10 seconds.
Event Occurs | Event Ends |
| Event Occurs | Event Occurs | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| 10 seconds |
|
|
| |
|
|
|
|
|
| ||||
Updates the event list |
|
| Ignore list registration | Updates the event list | |||||
English _23