Samsung SHR-3040P If using a router, Using DVR Static IP, DVR Network, Router Dhcp IP Address

Page 49
MAC ADDRESS DHCP MODE
IP PORT
IP ADDRESS GATEWAY SUBNET

If using a router

Check the followings to prevent a possible confl ict with the static IP of the DVR.

Network

IP Router

LAN

 

DSL Modem

LAN

SHR-3040

Using DVR Static IP

Internet Connection : You can connect the DVR to a ADSL/Cable modem-based IP router, or to the IP router in the LAN environment.

DVR Network

 SETUP

1.Set <DHCP MODE> to <MANUAL> in “MAIN MENU >

EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP”.

2.Check if the IP is a static IP provided by the router.

For information about the IP, gateway, and subnet mask, contact your network administrator.

IP SETUP

00-0A-A2-08-08-F3

MANUAL

IP DETECT

50000

192.168.000.200

192.168.000.001

255.255.255.000

M

If the start (192.168.0.100) and end address

BANDWIDTH

HIGH (1.5Mbps↑)

 

(192.168.0.200) of the DHCP server are already

WEB SERVER PORT

00080

 

 

OK

 

specified, provide other addresses (192.168.0.201~192.

 

ESC

 

168.0.524).

 

 

 

Check if the settings of the gateway and subnet mask match those of the IP router.

 

Router DHCP IP Address

1.To access the IP router menu, provide the router address in the address bar of the Internet browser from a local PC in connection with the IP router.(ex: http://192.168.1.1)

2.Then, specify the network settings of the local PC as follows:

Ex) IP: 192.168.1.2

Subnet mask: 255.255.255.0

Gateway: 192.168.1.1

3.Use the address to connect to the IP router and open the setup page.

Access the DHCP setup menu of the IP router where you can select the DHCP server mode and specify the start and end address.

Provide the start (192.168.0.100) and end (192.168.0.200) address, respectively.

The network settings may differ depending on the IP router.

English _49

Image 49
Contents Channel DVR 2X Zoom KEY FeaturesStandards Approvals Important Safety Instructions Overview Before Start BatteryInstallation CD User’s Manual Remote Control/Battery AAAX2What’s Included DVRContents Client Setup What is Web Viewer?Remote Setup Appearance & DimensionFront Panel Rear Panel Audio Remote Control AT a Glance The rack installation is available only in shelf type Checking the Installation EnvironmentInstalling HDD Connecting to video, audio, and monitor Connecting to a Different DeviceConnecting to RS-485, alarm USB Connection Network ConnectionConnect the power cable of the DVR to the wall outlet LoginLive Getting StartedHDD Auto Live Screen ConfigurationFull Zoom View the Launcher MenuPIP Display Mode SwitchSplit Screen Single Screen of CH Auto Sequence ZoomFreeze CH4 CH1PTZ RecordPercent Search SearchDate/Time Search Search menu appearsEvent Search PlayEvent Search Specify a time in Main Menu Configuration To set the event updateInterval Setup Event Update Event MonitoringEvent Monitoring on the Spot Monitor Spot SetupUsing the mouse Using the MenuUsing the buttons on the remote control or the front panel  SetupVGA Setup Display SetupDisplay Setup VGA SetupOSD Setup Screen Display SetupOSD Setup Record SetupRecord Setup Quality Select the quality from Highest, High and NormalSETUP, and press OK Schedule SetupSchedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementCamera Setup Camera SetupChannel Select a channel to change the title Alarm Setup Motion Setup By default, all cells are set to disabled Motion SetupSetup Interval SetupAlarm Setup Auto sequence interval for each camera channelPassword Setup Date/Time SetupDATE/TIME Setup User ID Select a user ID Buzzer SetupKEY Tone Set the key tone of the button OccursIP Setup TCP/IP SetupTCP/IP Setup External DeviceWhat is DDNS? Ddns SetupIP Setup Ddns SetupCommand Setup PTZ SetupPTZ Setup Command SetupSpeed Setup Speed SetupMouse Setup Mouse SetupSpecify the Sensitivity Spot Setup Audio SetupAdjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupFile System is not Supported System MessagesSize is Larger than Free Space Upgrade Firmware UpgradeYou can upgrade the DVR fi rmware with the latest version Firmware UpgradeFactory Default Factory DefaultChanging Factory Default Select Load Setup Load SetupLanguage You can select a language to your preferenceConnection Network Connection and SettingsStatic IP Mode If you are not using a router for network connectionDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuUsing DVR Static IP If using a routerDVR Network Router Dhcp IP AddressPort Forwarding of Web Server Port Router Port Forwarding with IP/Port RouterConnecting to the WEB Viewer What is WEB VIEWER?System Requirements  WEB ViewerWEB Viewer AT a Glance Web Viewer Setup Client SetupUpdate To register a web siteBuzzer Remote SetupTo return to the Web Viewer screen, click Close You can set the recording schedule Refer to Schedule SETUP. You can set the recording quality Refer to Record SETUP.Record Configuration Record SchedulePlayer Player at a Glance Edit Tool Image EditAudio signal will not be saved with AVI Save When done, the ‘C WEBBACKUP’ folder will openRemote Viewer Remote Viewer at a Glance You can select Single screen or 4-split modePTZ Control DVR Only the admin user account can access the Setup menu SetupEvent USB Product Specification Appendix 20C ~ +60C -4F ~ +140F Ddns20% to 85% RH 258 247 371 Appearance & DimensionTroubleshooting FAQ Audio Setup Correct disposal of batteries in this product