Samsung SHR-3040P manual Record Setup, Quality Select the quality from Highest, High and Normal

Page 28

setup

5.Use the up/down (▲▼) button to set the “TOP OSD OFFSET”.

The icon bar in the upper corner of the Live screen will be removed up or down.

6.When done, select <OK>. Your setting will be applied.

If you select <DEFAULT>, the settings will be restored to the factory default.

7.To return to the previous menu, select <ESC>.

OSD SETUP

TOP OSD OFFSET

0

OK

DEFAULTESC

RECORD

You can conﬁ gure the record and recording schedule settings.

Record Setup

You can set options of the record quality, frame rate and pre alarm record.

1.Press the [MENU] button on the remote control or the front panel.

The “DVR LOG-IN” dialog appears.

2.Enter the password and select <ENTER>. The “MAIN MENU” screen appears.

3.Use the up/down (▲▼) button to select <RECORD>, and press [OK].

The “RECORD” setting screen appears.

4.Use the up/down (▲▼) button to select <RECORD SETUP>, and press [OK].

The “RECORD SETUP” screen appears.

MAIN MENU

DISPLAY SETUP

RECORD

CONFIGURATION

EXTERNAL DEVICE

BACK-UP

FIRMWARE UPGRADE

FACTORY DEFAULT

LANGUAGE

ENGLISH

SHUTDOWN

EXIT

RECORD

RECORD SETUP

SCHEDULE SETUP

ESC

5.Use the up/down (▲▼) button to move to a desired item.

•QUALITY: Select the quality from Highest, High and Normal.

The remaining time will change according to the quality.

•FRAME RATE: Set the frame rate per second.

The higher the frame rate is, the more natural the video becomes but the remaining recordable time will be shortened.

RECORD SETUP

QUALITY	HIGH
FRAME RATE	30 FPS
PRE ALARM RECORD	OFF

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

HDD REMAINING	236GB/320GB
TIME REMAINING	D-14 H-11 M-25
	OK
DEFAULT	ESC

28_ setup

Image 28

Contents Channel DVR KEY Features 2X ZoomStandards Approvals Important Safety Instructions Overview Battery Before StartRemote Control/Battery AAAX2 Installation CD User’s ManualWhat’s Included DVRContents What is Web Viewer? Client SetupRemote Setup Appearance & DimensionFront Panel Rear Panel Remote Control AT a Glance AudioChecking the Installation Environment  The rack installation is available only in shelf typeInstalling HDD Connecting to video, audio, and monitor Connecting to a Different DeviceConnecting to RS-485, alarm Network Connection USB ConnectionLogin Connect the power cable of the DVR to the wall outletLive Getting StartedHDD Auto Live Screen ConﬁgurationFull View the Launcher Menu ZoomPIP Display Mode SwitchSplit Screen Single Screen of CH Zoom Auto SequenceFreeze CH4 CH1Record PTZSearch Percent SearchDate/Time Search Search menu appearsEvent Search PlayEvent Search To set the event update Specify a time in Main Menu ConfigurationInterval Setup Event Update Event MonitoringSpot Setup Event Monitoring on the Spot Monitor Using the Menu Using the mouse Using the buttons on the remote control or the front panel  SetupDisplay Setup VGA SetupDisplay Setup VGA SetupScreen Display Setup OSD SetupRecord Setup OSD SetupRecord Setup Quality Select the quality from Highest, High and NormalSchedule Setup SETUP, and press OKSchedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementCamera Setup Camera SetupChannel Select a channel to change the title Motion Setup Alarm Setup By default, all cells are set to disabled Motion SetupInterval Setup SetupAlarm Setup Auto sequence interval for each camera channelPassword Setup Date/Time SetupDATE/TIME Setup Buzzer Setup User ID Select a user IDKEY Tone Set the key tone of the button OccursTCP/IP Setup IP SetupTCP/IP Setup External DeviceDdns Setup What is DDNS?IP Setup Ddns SetupPTZ Setup Command SetupPTZ Setup Command SetupSpeed Setup Speed SetupMouse Setup Mouse SetupSpecify the Sensitivity Audio Setup Spot SetupAdjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupFile System is not Supported System MessagesSize is Larger than Free Space Firmware Upgrade UpgradeYou can upgrade the DVR ﬁ rmware with the latest version Firmware UpgradeFactory Default Factory DefaultChanging Factory Default Load Setup Select Load SetupLanguage You can select a language to your preferenceNetwork Connection and Settings ConnectionIf you are not using a router for network connection Static IP ModeDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuIf using a router Using DVR Static IPDVR Network Router Dhcp IP AddressPort Forwarding with IP/Port Router Port Forwarding of Web Server Port RouterWhat is WEB VIEWER? Connecting to the WEB ViewerSystem Requirements  WEB ViewerWEB Viewer AT a Glance Client Setup Web Viewer SetupUpdate To register a web siteBuzzer Remote SetupTo return to the Web Viewer screen, click Close You can set the recording quality Refer to Record SETUP. You can set the recording schedule Refer to Schedule SETUP.Record Conﬁguration Record SchedulePlayer Player at a Glance Image Edit Edit ToolAudio signal will not be saved with AVI Save When done, the ‘C WEBBACKUP’ folder will openRemote Viewer You can select Single screen or 4-split mode Remote Viewer at a GlancePTZ Control DVRSetup  Only the admin user account can access the Setup menuEvent USB Product Specification Appendix 20C ~ +60C -4F ~ +140F Ddns20% to 85% RH Appearance & Dimension 258 247 371Troubleshooting FAQ Audio Setup Correct disposal of batteries in this product