Samsung SHR-3040P Firmware Upgrade, You can upgrade the DVR ﬁ rmware with the latest version

Page 44

setup

FIRMWARE UPGRADE

You can upgrade the DVR ﬁ rmware with the latest version.

Upgrade

1.Press the [MENU] button on the front panel or remote control.

The “DVR LOG-IN” dialog appears.

2.Enter the password and select <ENTER>. The “MAIN MENU” screen appears.

3.Use the up/down (▲▼) button to select <FIRMWARE UPGRADE>, and press [OK].

The “FIRMWARE UPGRADE” screen appears.

4.Connect the USB device that stores upgradeable ﬁ les.

5.Select <CHECK USB>.

MAIN MENU

DISPLAY SETUP

RECORD

CONFIGURATION

EXTERNAL DEVICE

BACK-UP

FIRMWARE UPGRADE

FACTORY DEFAULT

LANGUAGE	ENGLISH
SHUTDOWN
	EXIT

	FIRMWARE UPGRADE
CURRENT VER	V0.14_090611N
UPGRADE VER
FILE:

CHECK USB

UPGRADE

ESC

6.If there founds any upgradeable ﬁ le, select <UPGRADE>.

7.After the login process, the DVR will perform the upgrade step by step.

8.When done, restart the player.

J During the ﬁrmware upgrade, recording will be stopped and the Live screen in the viewer may skip.

As the player performs upgrade with the ﬁrst one if there is more than one upgradeable ﬁle in the USB device, so ensure that there should be only one upgrade ﬁle in the USB device.

FIRMWARE UPGRADE
CURRENT VER		V0.14_090611N
UPGRADE VER		V0.14_090611N
FILE:	SHR-3040_V0.14_090611N.BIN
YOU ARE TRYING TO UPGRADE THE FIRM-
WARE WITH SAME OR PREVIOUS VERSION.
PRESS UPGRADE
CHECK USB			ESC
	UPGRADE

44_ setup

Image 44

Contents Channel DVR KEY Features 2X Zoom Overview Important Safety InstructionsStandards Approvals Battery Before StartRemote Control/Battery AAAX2 Installation CD User’s ManualWhat’s Included DVRContents What is Web Viewer? Client SetupRemote Setup Appearance & DimensionFront Panel Rear Panel Remote Control AT a Glance AudioChecking the Installation Environment  The rack installation is available only in shelf typeInstalling HDD Connecting to RS-485, alarm Connecting to a Different DeviceConnecting to video, audio, and monitor Network Connection USB ConnectionLogin Connect the power cable of the DVR to the wall outletLive Getting StartedFull Live Screen ConﬁgurationHDD Auto View the Launcher Menu ZoomSplit Screen Single Screen of CH Mode SwitchPIP Display Zoom Auto SequenceFreeze CH4 CH1Record PTZSearch Percent SearchDate/Time Search Search menu appearsEvent Search PlayEvent Search To set the event update Specify a time in Main Menu ConfigurationInterval Setup Event Update Event MonitoringSpot Setup Event Monitoring on the Spot MonitorUsing the Menu Using the mouseUsing the buttons on the remote control or the front panel  SetupDisplay Setup VGA SetupDisplay Setup VGA SetupScreen Display Setup OSD SetupRecord Setup OSD SetupRecord Setup Quality Select the quality from Highest, High and NormalSchedule Setup SETUP, and press OKSchedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementChannel Select a channel to change the title Camera SetupCamera Setup Motion Setup Alarm Setup By default, all cells are set to disabled Motion SetupInterval Setup SetupAlarm Setup Auto sequence interval for each camera channelDATE/TIME Setup Date/Time SetupPassword Setup Buzzer Setup User ID Select a user IDKEY Tone Set the key tone of the button OccursTCP/IP Setup IP SetupTCP/IP Setup External DeviceDdns Setup What is DDNS?IP Setup Ddns SetupPTZ Setup Command SetupPTZ Setup Command SetupSpeed Setup Speed SetupSpecify the Sensitivity Mouse SetupMouse Setup Audio Setup Spot Setup Adjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupSize is Larger than Free Space System MessagesFile System is not Supported Firmware Upgrade UpgradeYou can upgrade the DVR ﬁ rmware with the latest version Firmware UpgradeChanging Factory Default Factory DefaultFactory Default Load Setup Select Load SetupLanguage You can select a language to your preferenceNetwork Connection and Settings ConnectionIf you are not using a router for network connection Static IP ModeDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuIf using a router Using DVR Static IPDVR Network Router Dhcp IP AddressPort Forwarding with IP/Port Router Port Forwarding of Web Server Port RouterWhat is WEB VIEWER? Connecting to the WEB ViewerSystem Requirements  WEB ViewerWEB Viewer AT a Glance Client Setup Web Viewer SetupUpdate To register a web siteTo return to the Web Viewer screen, click Close Remote SetupBuzzer You can set the recording quality Refer to Record SETUP. You can set the recording schedule Refer to Schedule SETUP.Record Conﬁguration Record SchedulePlayer Player at a Glance Image Edit Edit ToolRemote Viewer When done, the ‘C WEBBACKUP’ folder will openAudio signal will not be saved with AVI Save You can select Single screen or 4-split mode Remote Viewer at a GlancePTZ Control DVRSetup  Only the admin user account can access the Setup menuEvent  Appendix Product SpecificationUSB 20% to 85% RH Ddns20C ~ +60C -4F ~ +140F Appearance & Dimension 258 247 371Troubleshooting FAQ Audio Setup Correct disposal of batteries in this product