Samsung SHR-3040P manual Backup, Event Popup Duration Specify the event popup

Page 42

setup

5.Use the up/down (▲▼) button to move to a desired item.

•SWITCHING INTERVAL: Specify the switching interval for the spot monitor.

•ALARM POPUP: Set to display a popup message if an alarm signal is detected.

•MOTION POPUP: Set to display a popup message if a motion signal is detected.

SPOT SETUP

SWITCHING INTERVAL	03 SEC
ALARM POPUP	OFF
MOTION POPUP	OFF
EVENT POPUP DURATION	05 SEC

	• EVENT POPUP DURATION: Specify the event popup		OK
		DEFAULT	ESC
	duration.

6.When done, select <OK>. Your setting will be applied.

If you select <DEFAULT>, the settings will be restored to the factory default.

7.To return to the previous menu, select <ESC>.

BACKUP

You can backup HDD recording data on a USB storage device.

Backup

1.Press the [MENU] button on the front panel or remote control.

The “DVR LOG-IN” dialog appears.

2.Enter the password and select <ENTER>. The “MAIN MENU” screen appears.

3.Use the up/down (▲▼) button to select <BACK-UP>, and press [OK].

The “BACK-UP” screen appears.

MAIN MENU

DISPLAY SETUP

RECORD

CONFIGURATION

EXTERNAL DEVICE

BACK-UP

FIRMWARE UPGRADE

FACTORY DEFAULT

LANGUAGE

ENGLISH

SHUTDOWN

EXIT

4.Connect the USB device and select <CHECK USB>. A device list of the search results will appear with device information.

BACK-UP

HDD
START	2009/ 05/01		00:00:06
END	2009/ 05/01		00:00:20
MEDIA
PARTITION
START	/	/	: :
END
SIZE	MB	->	MB

CHECK USB

BACK-UP

ESC

42_ setup

Image 42

Contents Channel DVR KEY Features 2X ZoomImportant Safety Instructions Standards Approvals Overview Battery Before StartWhat’s Included Remote Control/Battery AAAX2Installation CD User’s Manual DVRContents Remote Setup What is Web Viewer?Client Setup Appearance & DimensionFront Panel Rear Panel Remote Control AT a Glance AudioChecking the Installation Environment  The rack installation is available only in shelf typeInstalling HDD Connecting to a Different Device Connecting to video, audio, and monitorConnecting to RS-485, alarm Network Connection USB ConnectionLive LoginConnect the power cable of the DVR to the wall outlet Getting StartedLive Screen Conﬁguration HDD AutoFull View the Launcher Menu ZoomMode Switch PIP DisplaySplit Screen Single Screen of CH Freeze ZoomAuto Sequence CH4 CH1Record PTZDate/Time Search SearchPercent Search Search menu appearsPlay Event SearchEvent Search Interval Setup Event Update To set the event updateSpecify a time in Main Menu Configuration Event MonitoringSpot Setup Event Monitoring on the Spot MonitorUsing the buttons on the remote control or the front panel Using the MenuUsing the mouse  SetupDisplay Setup Display SetupVGA Setup VGA SetupScreen Display Setup OSD SetupRecord Setup Record SetupOSD Setup Quality Select the quality from Highest, High and NormalSchedule Setup screen appears Schedule SetupSETUP, and press OK Schedule SetupHDD Management ConfigurationConfiguration HDD ManagementCamera Setup Camera SetupChannel Select a channel to change the title  By default, all cells are set to disabled Motion SetupAlarm Setup Motion SetupAlarm Setup Interval SetupSetup Auto sequence interval for each camera channelDate/Time Setup Password SetupDATE/TIME Setup KEY Tone Set the key tone of the button Buzzer SetupUser ID Select a user ID OccursTCP/IP Setup TCP/IP SetupIP Setup External DeviceIP Setup Ddns SetupWhat is DDNS? Ddns SetupPTZ Setup PTZ SetupCommand Setup Command Setup Speed Setup Speed SetupMouse Setup Mouse SetupSpecify the Sensitivity Adjust the I/O volume Audio SetupSpot Setup Audio SetupYou can backup HDD recording data on a USB storage device BackupBackup Event Popup Duration Specify the event popupSystem Messages File System is not SupportedSize is Larger than Free Space You can upgrade the DVR ﬁ rmware with the latest version Firmware UpgradeUpgrade Firmware UpgradeFactory Default Factory DefaultChanging Factory Default Language Load SetupSelect Load Setup You can select a language to your preferenceNetwork Connection and Settings ConnectionDynamic IP Dhcp Mode If you are not using a router for network connectionStatic IP Mode Set Dhcp Mode to Manual in Main MenuDVR Network If using a routerUsing DVR Static IP Router Dhcp IP AddressPort Forwarding with IP/Port Router Port Forwarding of Web Server Port RouterSystem Requirements What is WEB VIEWER?Connecting to the WEB Viewer  WEB ViewerWEB Viewer AT a Glance Update Client SetupWeb Viewer Setup To register a web siteRemote Setup BuzzerTo return to the Web Viewer screen, click Close Record Conﬁguration You can set the recording quality Refer to Record SETUP.You can set the recording schedule Refer to Schedule SETUP. Record SchedulePlayer Player at a Glance Image Edit Edit ToolWhen done, the ‘C WEBBACKUP’ folder will open Audio signal will not be saved with AVI SaveRemote Viewer PTZ Control You can select Single screen or 4-split modeRemote Viewer at a Glance DVRSetup  Only the admin user account can access the Setup menuEvent Product Specification USB Appendix Ddns 20C ~ +60C -4F ~ +140F20% to 85% RH Appearance & Dimension 258 247 371Troubleshooting FAQ Audio Setup Correct disposal of batteries in this product