Samsung SHR-3040P manual If you are not using a router for network connection, Static IP Mode

Page 48

setup

If you are not using a router for network connection

Static IP Mode

You can establish a direct connection, or connect DVR and remote users in a LAN environment.

Network

1.Set <DHCP MODE> to <MANUAL> in “MAIN MENU >

EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP”.

For information about the IP, gateway, and subnet mask, consult your network administrator.

	SHR-3040

	IP SETUP
MAC ADDRESS		00-0A-A2-08-08-F3
DHCP MODE			MANUAL
			IP DETECT
IP PORT			50000
IP ADDRESS	192.168.000.200
GATEWAY	192.168.000.001
SUBNET	255.255.255.000
BANDWIDTH	HIGH		(1.5Mbps↑)
WEB SERVER PORT			00080
			OK

ESC

Dynamic IP (DHCP) Mode

You can connect the DVR directly to the cable modem, or directly to the optical LAN.

1.Set <DHCP MODE> to <AUTO> in “MAIN MENU > EXTERNAL DEVICE > TCP/IP SETUP > IP SETUP”.

J If authentication is required to connect to the broadband network separately, it is recommended to use a router.

48_ setup

Image 48

Contents Channel DVR KEY Features 2X ZoomImportant Safety Instructions Standards Approvals Overview Battery Before StartRemote Control/Battery AAAX2 Installation CD User’s ManualWhat’s Included DVRContents What is Web Viewer? Client SetupRemote Setup Appearance & DimensionFront Panel Rear Panel Remote Control AT a Glance AudioChecking the Installation Environment  The rack installation is available only in shelf typeInstalling HDD Connecting to a Different Device Connecting to video, audio, and monitorConnecting to RS-485, alarm Network Connection USB ConnectionLogin Connect the power cable of the DVR to the wall outletLive Getting StartedLive Screen Conﬁguration HDD AutoFull View the Launcher Menu ZoomMode Switch PIP DisplaySplit Screen Single Screen of CH Zoom Auto SequenceFreeze CH4 CH1Record PTZSearch Percent SearchDate/Time Search Search menu appearsPlay Event SearchEvent Search To set the event update Specify a time in Main Menu ConfigurationInterval Setup Event Update Event MonitoringSpot Setup Event Monitoring on the Spot MonitorUsing the Menu Using the mouseUsing the buttons on the remote control or the front panel  SetupDisplay Setup VGA SetupDisplay Setup VGA SetupScreen Display Setup OSD SetupRecord Setup OSD SetupRecord Setup Quality Select the quality from Highest, High and NormalSchedule Setup SETUP, and press OKSchedule Setup screen appears Schedule SetupConfiguration ConfigurationHDD Management HDD ManagementCamera Setup Camera SetupChannel Select a channel to change the title Motion Setup Alarm Setup By default, all cells are set to disabled Motion SetupInterval Setup SetupAlarm Setup Auto sequence interval for each camera channelDate/Time Setup Password SetupDATE/TIME Setup Buzzer Setup User ID Select a user IDKEY Tone Set the key tone of the button OccursTCP/IP Setup IP SetupTCP/IP Setup External DeviceDdns Setup What is DDNS?IP Setup Ddns SetupPTZ Setup Command SetupPTZ Setup Command SetupSpeed Setup Speed SetupMouse Setup Mouse SetupSpecify the Sensitivity Audio Setup Spot SetupAdjust the I/O volume Audio SetupBackup BackupYou can backup HDD recording data on a USB storage device Event Popup Duration Specify the event popupSystem Messages File System is not SupportedSize is Larger than Free Space Firmware Upgrade UpgradeYou can upgrade the DVR ﬁ rmware with the latest version Firmware Upgrade Factory Default Factory Default Changing Factory Default Load Setup Select Load SetupLanguage You can select a language to your preferenceNetwork Connection and Settings ConnectionIf you are not using a router for network connection Static IP ModeDynamic IP Dhcp Mode Set Dhcp Mode to Manual in Main MenuIf using a router Using DVR Static IPDVR Network Router Dhcp IP AddressPort Forwarding with IP/Port Router Port Forwarding of Web Server Port RouterWhat is WEB VIEWER? Connecting to the WEB ViewerSystem Requirements  WEB ViewerWEB Viewer AT a Glance Client Setup Web Viewer SetupUpdate To register a web siteRemote Setup BuzzerTo return to the Web Viewer screen, click Close You can set the recording quality Refer to Record SETUP. You can set the recording schedule Refer to Schedule SETUP.Record Conﬁguration Record SchedulePlayer Player at a Glance Image Edit Edit ToolWhen done, the ‘C WEBBACKUP’ folder will open Audio signal will not be saved with AVI SaveRemote Viewer You can select Single screen or 4-split mode Remote Viewer at a GlancePTZ Control DVRSetup  Only the admin user account can access the Setup menuEvent Product Specification USB Appendix Ddns 20C ~ +60C -4F ~ +140F20% to 85% RH Appearance & Dimension 258 247 371Troubleshooting FAQ Audio Setup Correct disposal of batteries in this product