5.Specify the start time, date range and size to backup.
You can specify the backup size for a backup device. The end time and date will be set according to the backup size.
You can change the start time and date if you want to.
6.Select
J During backup, recording will be stopped and the Live screen will be lost in the viewer.
BACK-UP
HDD |
|
|
|
START | 2009/ 05/01 | 00:00:43 | |
END | 2009/ 05/01 | 00:00:15 | |
MEDIA |
|
|
|
PARTITION | 3838MB/ | 3848MB | |
START | 2009/ 05/01 | 00:00:43 | |
END | 2009/ 05/01 | 00:00:14 | |
SIZE | 003836MB | 3444MB | |
USB STORAGE IS AVAILABLE |
|
| |
CHECK USB |
| ESC | |
|
|
|
|
SETUP
7.When backup is done, the start time will be moved later than the completion time, and the end time will be adjusted according to the backup size.
8.Launch the web viewer from a remote PC where you can check the backup data using the <PLAYER>.
You can also play the data using <AUTO PLAYER> that is created in the USB storage device after the backup.
System Messages
You will see the following messages when the DVR has checked USB storage devices.
If no USB storage is inserted | If a USB storage is recognized |
|
|
USB STORAGE IS NOT AVAILABLE. | CHECK USB |
CHECK USB | THERE IS A FREE SPACE ON STORAGE. |
RECONNECT THE USB STORAGE. | USB STORAGE IS AVAILABLE. |
CONNECT THE OTHER USB STORAGE. |
|
|
|
During backup | Error messages |
|
|
START WRITING IN USB STORAGE. | THERE IS A PROBLEM ON USB PORT |
FINISH WRITING IN USB STORAGE. | (If USB port does not operate properly) |
| |
| USB STORAGE IS FULL. (No free space in the USB device) |
| CHANGE WRITE PROTECT MODE. (Write protection mode ) |
| FILE SYSTEM IS NOT SUPPORTED. |
| (If the file system is not supported) |
| SIZE IS LARGER THAN FREE SPACE. |
| (If backup size is larger than the free space in the USB |
| device) |
|
|
English _43