NETWORK CONNECTION AND SETTINGS
Network settings differ depending on the connection mode, so check your network connection mode before proceeding.
Connection
If connecting to a local network using a router
1.Launch the Internet browser.
2.Provide an IP address in the address bar.
Ex) IP Address: 192.168.1.200 http://192.168.1.200
If the HTTP port is other than 80
1.Launch the Internet browser.
2.Provide an IP address and HTTP port number of the DVR in the address bar.
Ex) IP Address: 192.168.1.200: Port Number (1000) | http://192.168.1.200:10000 |
Connecting via URL
1.Launch the Internet browser.
2.Provide a DDNS URL of the DVR in the address bar. Ex) 6 digits from the end of the MAC address:
<00:00:f0> g + 0000f0 + websamsung.net = g0000f0.websamsung.net
Connecting via URL - If the HTTP port is other than 80
1.Launch the Internet Browser.
2.Provide a DDNS URL and HTTP port number of the camera in the address bar. Ex) IP Address: http://g0000f0.websamsung.net: Port Number (10000)
http://g000f0.websamsung.net:10000
SETUP
English _47